post #1 of 1
Thread Starter 
hello folks, i was supposed to go with a swiftech h220 cause i would add a gpu waterblock later and that kit's pump should provide enough power, but i've read that it's everything but reliable, so i wouldn't be forced to send it back to factory 3 or 4 times as happens often, so i've looked for something else and i found this phobya kit that looks great, it costs around 190AU$; the full kit contains

1x Phobya CPU-Cooler UC-2 LT Black Edition
1x Phobya G-Changer 240 V.2
1x Phobya DC12-220 12V pump
1x Phobya Balancer 150 black nickel
1x Phobya G-Silent 12 1500rpm Red LED (120 x 120 x 25mm)
7x 13/10mm (10x1.5mm) compression fitting G1/4 black nickel
1x 13/10mm (10x1.5mm) compression fitting 90 degree revolvable G1/4 black nickel
1x 3m Masterkleer Tubing PVC 13/10mm (3/8in ID) - black
1x Phobya ZuperZero Clear 1000ml
1x Tube cutter
1x ATX Bridging plug
1x Printed manual and Phobya stickers

my only doubt is concerning PWM, both pump and fans (they say 1x but i guess are 2x fans in the kit) come with 3pins plug, is it a big deal? i guess the pump will always run at full speed, which it shouldn't be a problem cause it's supposed to stay below 17db. the fans are not a problem since i can swap them for 4-pins ones. Phobya produces 2 more powerfull pumps for 5-10 bucks more and would be good get one of them but i'm not sure i can ask to replace the standard one with another one, do you reckon 400L\h 2.2m are enough for both cpu and gpu? or 600L\h 2.6m and 800L/h 4.0m would be much better?
thanks in advance for your time, any other suggestion is highly appreciated smile.gif