Originally Posted by stickg1
Well before you said +200mV and 85C. 104C on +100mV is not okay. What heatsinks and thermal tape did you use?
It was just a preliminary test, I stopped it after few seconds to check temperatures.
GPU Core Clock [MHz] , GPU Memory Clock [MHz] , GPU Temperature [°C] , Fan Speed (%) [%] , Fan Speed (RPM) [RPM] , GPU Load [%] , Memory Usage (Dedicated) [MB] , Memory Usage (Dynamic) [MB] , 12V [V] , VDDC [V] , VDDCI [V] , VDDC Current In [A] , VDDC Current Out [A] , VDDC Power In [W] , VDDC Power Out [W] , VRM Temperature 1 [°C] , VRM Temperature 2 [°C] ,
1200.0 , 1450.0 , 71.0 , - , - , 100 , 1256 , 11.50 , 1.180 , 1.000 , 28.3 , 213.5 , 327.0 , 234.5 , 104 , 49 ,
Those are the datas from the GPU-Z log :\ 1.2v effective (according to the programm but I was +0.100mV)... I don't know, I used this guide: http://www.overclock.net/t/1437634/installation-guide-tips-of-rev-2-icy-vision-on-r9-290x/0_50
, but instead of 6 small VRM heatsinks I used 5 since one wasn't really in contact with much surface.. I'm unmounting again this ***** to see what's wrong, brb :\