Originally Posted by Wooojciech1983
It does not show artifacts. I have just repeated the test with monitoring, see that AF reports higher voltage then 1.21V:
Maybe AF monitoring is wrong, GPU-Z monitoring shows different value - 1.21V, I can't measure the real voltage but there is one more very strange thing about it.
If I run the test on exactly the same settings, the same clocks but on Auto voltage (~1.21V) I got ~400pkt lower graphics score, and if I raise the voltage to 1.3V (1300) and keep the same clocks it crashes with a BSOD.
Originally Posted by OccamRazor
AB only works properly inside C:/program files (x86)!
And it still does not support 780Ti properly, actually NO PROGRAM is working correctly with 780Ti/780TiClassified at the moment as there were no software updates since its launch and the ones that did, contained no 780Ti update!
Its a matter of time anyway!
Dont bother, what you are doing its was already done when the card came out! there is NO PROGRAM that fully supports the 780Ti/780Ti Classified at the moment
Volt mods are not available at this time for the 780Ti unfortunately! We are working on it is all i can say for now!