Overclock.net › Forums › Components › Sound Cards and Computer Audio › Questions about microphone setup
New Posts  All Forums:Forum Nav:

Questions about microphone setup

post #1 of 3
Thread Starter 
So I currently have a dynamic mic plugged into my focusrite 2i4 interface and neither has an on/off switch. I use the 2i4 for audio playback as well, so I can't ever unplug it.

Is it hard on the interface to leave the gain knob turned up all the time? Right now I just turn the gain down to zero when I'm not using the mic, but it's a pain to have to turn it back up to just the right setting. This is just used for voice chat, so I have to mess with the gain multiple times per day. Is there a way to add a hardware on/off between the mic and interface? Even if that is possible, would it still be bad to leave the gain on the amp turned up all the time?
My System
(19 items)
 
  
CPUMotherboardGraphicsRAM
3570K GA-Z77X-UD5H EVGA 980 ti Classified 16 GB Samsung 30nm 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro Intel 730 WD RE CM Hyper 212 EVO 
OSMonitorMonitorKeyboard
Windows 10 Dell S2716DG 1440p 144 Hz G-Sync NEC PA272 27" 1440p Leopold FC660C Topre 
PowerCaseMouseAudio
EVGA 850W Supernova G2 Fractal Design Define R4 Logitech G502 ODAC + O2 
Audio
Earwerkz Supra 
  hide details  
Reply
My System
(19 items)
 
  
CPUMotherboardGraphicsRAM
3570K GA-Z77X-UD5H EVGA 980 ti Classified 16 GB Samsung 30nm 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro Intel 730 WD RE CM Hyper 212 EVO 
OSMonitorMonitorKeyboard
Windows 10 Dell S2716DG 1440p 144 Hz G-Sync NEC PA272 27" 1440p Leopold FC660C Topre 
PowerCaseMouseAudio
EVGA 850W Supernova G2 Fractal Design Define R4 Logitech G502 ODAC + O2 
Audio
Earwerkz Supra 
  hide details  
Reply
post #2 of 3
I don't know, but it's possible that the gain knob works like a light dimmer, using variable resistance. As the resistance increases, the total gain drops and the heat in the resistor increases. If you turn the gain knob up, the heat in the resistor will drop, but more charge flows throughout the circuit, which will increase the heat there.

Either way, I really don't think the resistor or the rest of the circuit is in any danger of frying. (The 2i4 doesn't run hot.) It's probably more likely that you break the knob by turning it too much.
sinep
(11 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 GA-X58A-UD3R MSI GTX 650Ti Corsair XMS3 
Hard DriveOSMonitorKeyboard
WD10EZEX + Crucial M4 64-bit Windows 7 Home Premium Asus VG248QE </3 Sidewinder X4 
MouseMouse PadAudio
Logitech G302 Upside down Puretrak Talent Focusrite Scarlett 2i2 + Red Sony MDRZX300 
  hide details  
Reply
sinep
(11 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 GA-X58A-UD3R MSI GTX 650Ti Corsair XMS3 
Hard DriveOSMonitorKeyboard
WD10EZEX + Crucial M4 64-bit Windows 7 Home Premium Asus VG248QE </3 Sidewinder X4 
MouseMouse PadAudio
Logitech G302 Upside down Puretrak Talent Focusrite Scarlett 2i2 + Red Sony MDRZX300 
  hide details  
Reply
post #3 of 3
Thread Starter 
Alright thanks, that sorta confirms my suspicions. It certainly doesn't heat up to any noticeable degree.
My System
(19 items)
 
  
CPUMotherboardGraphicsRAM
3570K GA-Z77X-UD5H EVGA 980 ti Classified 16 GB Samsung 30nm 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro Intel 730 WD RE CM Hyper 212 EVO 
OSMonitorMonitorKeyboard
Windows 10 Dell S2716DG 1440p 144 Hz G-Sync NEC PA272 27" 1440p Leopold FC660C Topre 
PowerCaseMouseAudio
EVGA 850W Supernova G2 Fractal Design Define R4 Logitech G502 ODAC + O2 
Audio
Earwerkz Supra 
  hide details  
Reply
My System
(19 items)
 
  
CPUMotherboardGraphicsRAM
3570K GA-Z77X-UD5H EVGA 980 ti Classified 16 GB Samsung 30nm 
Hard DriveHard DriveHard DriveCooling
Samsung 840 Pro Intel 730 WD RE CM Hyper 212 EVO 
OSMonitorMonitorKeyboard
Windows 10 Dell S2716DG 1440p 144 Hz G-Sync NEC PA272 27" 1440p Leopold FC660C Topre 
PowerCaseMouseAudio
EVGA 850W Supernova G2 Fractal Design Define R4 Logitech G502 ODAC + O2 
Audio
Earwerkz Supra 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Sound Cards and Computer Audio
Overclock.net › Forums › Components › Sound Cards and Computer Audio › Questions about microphone setup