Overclock.net › Forums › Graphics Cards › AMD/ATI › Bored of waiting for none ref 290X? Check this simple & cheap fix!
New Posts  All Forums:Forum Nav:

Bored of waiting for none ref 290X? Check this simple & cheap fix! - Page 19

post #181 of 182
Here's my XFX 290x with an Accelero Xtreme Plus II installed (99.9% same cooler as the Xtreme III)







As you can see, some of the VRAM modules were partially covered by the mounting bracket, but could have had heatsinks installed about half way, but I chose not to.

Testing will have to wait until next week due to a dead PSU.

The cooler might fit on the card, but how about the case...



biggrin.gif
Edited by JSTe - 12/13/13 at 4:15am
post #182 of 182
Hi Guys,

I am wanting to do a Quadfire Setup - I have the cards already 290x Reference I have enough Power 1200w + 650w (Add2Psu_Adapter)

All I need is the motherboard and the CPU wchich will be the 4930k which should remove any bottlenecks.

I was thinking about the Rampage Extreme 4 But then I thought Maybe the Cards will be 2 close Because of wha tI am about to consider, and here it is:

I was thinking Of getting a 7 PCIE Motherboard And having the cards Seperated by 1 slot Each If you can picture it? Now Ontop of this seperation I will remove the Standard cooler and in replace it with the GELID Icy Vision Universal VGA Cooler Rev 2 For each Card


What do you think about this guys? Aswell as All this I will have a good Case which will suck HOt air out and suck air in
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Bored of waiting for none ref 290X? Check this simple & cheap fix!