post #1 of 1
Thread Starter 
Hey so I made a mistake building my cooling loop and just noticed it. I accidentally mixed up the inlet/outlet on my 380I water block. Since I bent acrylic for the build, flipping the block would require draining and bending two complex tubes again for the slight difference in position. My i7 is at 4.7 ghz 1.3 volts and idle temps are in the 29-36 range while max load in prime95 gets up to 75-79* range. So im wondering if flipping the in/out would be enough of a temperature difference to be worth the trouble. Thanks smile.gif