Overclock.net › Forums › Cooling › Air Cooling › Noctua NH-U12P and G.Skill Ripjaws X compatibility
New Posts  All Forums:Forum Nav:

Noctua NH-U12P and G.Skill Ripjaws X compatibility

post #1 of 4
Thread Starter 
Hi!
I want to know if G.Skill Ripjaws X can fit with Noctua NH-U12P, from G.Skill website the Ripjaws X height is 40 mm, where as the noctua website said the max memory that can fit under Noctua NH-U12P is 40 mm.
If anyone with both Noctua and G.Skill ram confirm either it will fit or not.
Thank you.
post #2 of 4
I believe the NH-U12P has 41mm from cpu to bottom fin. CPU is 8mm above motherboard and RAM slots raise RAM 2-3mm. You should have at least 5mm clearance. Fan will set up a little higher. wink.gif
nh_u12p_clearance.jpg
Edited by doyll - 11/8/13 at 11:29am
post #3 of 4
Thread Starter 
Thanks, does this apply to the noctua NH-U12P too ? since the picture you posed is for NH-U14S and not NH-U12P .
post #4 of 4
Could swear the drawing posted is NH-U12P headscratch.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Noctua NH-U12P and G.Skill Ripjaws X compatibility