Overclock.net › Forums › Intel › Intel Motherboards › NEW INTEL DX580G MB INSTALL- HUNG ON BIOS CODE 58
New Posts  All Forums:Forum Nav:

NEW INTEL DX580G MB INSTALL- HUNG ON BIOS CODE 58

post #1 of 2
Thread Starter 
I hope this is in the correct forum, a rookie here.

I killed my mobo DX58SO and replaced it with an Intel DX580G. I doubt my HD will work again with this new mother board but i gave it a shot. The mobo has a 2 digit led to show the last code the bios read and where it stops. I'm hoping some of you are familiar with this code 58. The sheet says code 58 is- IO bus initialization: USB.

I unplug most my memory, HD and CD drive and still code 58. Once i did manage to boot into the Bios, screen and keyboard worked fine (it was nice to see the screen again)

Any help would be appreciated, thanks joe
post #2 of 2
Thread Starter 
ok.. i solved code 58. i figured out what an IO usb controller was, unpluged it and now we're good to go-

except won't boot into my old windows HD.. tries but i no longer have the correct drivers installed changing mobo's... I'll do a little more reading and see what i can do to boot into my old system.. joe:)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › NEW INTEL DX580G MB INSTALL- HUNG ON BIOS CODE 58