Thank you musicfan & Mr.Scott of extreme overclock forum I made two new videos based off of their recommendations:
1) I moved the reservoir down and added a fill port because you stated that it appeared as there was not enough room for the res. I remedied this by adding a fill port out the side of the case so the client doesn't have to move the DVD or anything in order to get to the reservoir to top it off. This was a massive pain in the *** but needed to be done.
As well this allowed me to reconfigure the drain port, it was a little tight at the angle that is previously was and I needed to straighten the pump out so the access to this drain quick disconnect would be seamless.
2) I changed the airflow from: exiting out the front of the case, to pulling air through the rad, out the back of the case, psu and top. As well this allowed me to use the fan filters on the grill at the front to better manage dust as you indicated would have been an issue with my previous setup.
3) I also took your suggestions on making videos a little better, This was the first attempt and made two videos for this mod, I like them to be anywhere from 10-15 min in length like singularity computers does. Its like a treat everytime he puts up a video.
Please take a look at my new videos and tell me what you think (2nd one may not be up tonight)Reanimation Fill Port part 1 - planning and disassemblyReanimation Fill Port part 2 - Filling the loop and finished productEdited by darwing - 12/14/13 at 10:04am