Originally Posted by cadaveca
I don't agree. At stock, new board will still shut down @ stock, listing PSU instability as cause of shutdown on POST.
But OC, or adjust current limits, it's fine.
I see board defaults to 140% under auto, too. Perhaps it's that setting screwing with me?
Honestlyy, Raja, I want to run normal stock. OC is great with this board/BIOS, but stock is not stable at all, and it's all about VRM settings under auto rules. Manually setting to "stock" values makes it even worse.
No problems at all on my end.
There are only two VRM settings related to OCP shutdowns, one is CPU Current Capability and the other is the Current Inrush setting. Try enabling the latter while leaving CPU Current Capability on Auto. Clear CMOS first.
Your issue actually sounds like something else though - possibly Super IO tripping due to irregular readings from PSU rails from the way you've worded things in your post above (might be Anti Surge Support tripping for some reason). This can happen erroneously if the Super IO has a fault or if something is messing up polling. In some cases the PSU rails really are outside spec. OCP shutdown does not give an error warning but Anti Surge Shutdown does. This stuff obviously has nothing to do with the OCP stuff the 0602 build was patched for.
You are the first person to report this - wonder if once again it's your "strange" CPUs that pull more current than anyone else's to blame
-RajaEdited by Raja@ASUS - 3/15/14 at 3:04pm