Overclock.net › Forums › Components › Keyboards › Ducky Shine 3 YOTS problem
New Posts  All Forums:Forum Nav:

Ducky Shine 3 YOTS problem

post #1 of 3
Thread Starter 
Hey guys, so I got it yesterday, and today, I switched the space bar for the other one they provide. After replacing it, when I press it now, it gets stuck half way coming back up. It's that feeling you press a normal cherry mx switch key right before it actuates, and you can feel it before it actuates.
That was when I fully pushed down the space bar so the key stays in (with the cross holder thing on the switch), but when applying less pressure to it, there was no more stuck problems, but the space bar was higher than normal and I could see the bright LED.
Did anyone have this problem and know a fix?

Gear mentioned in this thread:

post #2 of 3
it sounds to me like its not sitting properly in place when you installed the new bar.
did you try popping it off and re installing?
did you try popping the other bar back on to see if it replicates the same problem?
is it getting stuck to the chassis when you press it down?
post #3 of 3
Try taking off the space bar and pressing the switch under it.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Keyboards

Gear mentioned in this thread:

Overclock.net › Forums › Components › Keyboards › Ducky Shine 3 YOTS problem