Overclock.net › Forums › Cooling › Water Cooling › Moving from bay to tube res, is this correct?
New Posts  All Forums:Forum Nav:

Moving from bay to tube res, is this correct?

post #1 of 3
Thread Starter 
So I want to mount my pump vertically (like the Bitspower upgrade kits http://www.frozencpu.com/products/16075/ex-res-366/Bitspower_Dual_Single_D5_Top_Upgrade_Kit_250_-_Clear_BP-D5TOPUK250AC-BKCLCL.html ) but I'd like to use EK and have the top port as an inlet and have the res directly feed into the pump and out one of the pump top's ports.

Would this be the correct combo of parts?



Thanks!
post #2 of 3
Was looking at the same ... I believe you need
http://www.ekwb.com/shop/pumps-and-accessories/pump-tops/d5-series/ek-d5-dual-top-g1-4-csq-black-acetal.html

and the following goes on top of that..
http://www.ekwb.com/shop/pumps-and-accessories/pump-tops/d5-series/ek-dual-d5-csq-x-res-link.html

Wish they had a product (preferably in white), as just one entire unit for X3 Reservoir on Top and then with D5 on bottom -- like the AQ product.
post #3 of 3
Thread Starter 
That's for a dual pump setup, I wonder if you can plug it up for a single pump loop?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Moving from bay to tube res, is this correct?