Overclock.net › Forums › Intel › Intel CPUs › Kernel-Power Critical Event
New Posts  All Forums:Forum Nav:

Kernel-Power Critical Event

post #1 of 5
Thread Starter 
When I raise core multi to 43,I get a double boot every time from cold start up.
Turns on 3 seconds then restarts and then desktop.

I check event viewer and notice this,
Critical error Kernel power event id 41 task 63.

"The system has rebooted without cleanly shutting down first.
This error could be caused if the system stopped responding, crashed,
or lost power unexpectedly."


Currently settings which do not cause problem

core 42
manual voltage 1.25
other setting stock.

when i raise to 43 the above problem occurs.
Increasing voltage results in same error

core 43
manual voltage 1.35

So I am not sure what to do next, increasing voltage does not seem to make a difference.
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii gtx 780 sli gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 5x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii gtx 780 sli gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 5x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
post #2 of 5

Which of your two computers is this happening to?

It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.400-1.424V in Manual Mode) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (C:) 250 GB Samsung 840 EVO (D:) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.400-1.424V in Manual Mode) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (C:) 250 GB Samsung 840 EVO (D:) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 5
Thread Starter 
Yes, i forgot to mention it is with the newest system (4770k).
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii gtx 780 sli gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 5x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii gtx 780 sli gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 5x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
post #4 of 5

On Sandy Bridge, this was sometimes due to needing to enable Internal PLL Overvoltage. So, that's the only thing that I can personally think of.

It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.400-1.424V in Manual Mode) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (C:) 250 GB Samsung 840 EVO (D:) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.400-1.424V in Manual Mode) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (C:) 250 GB Samsung 840 EVO (D:) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #5 of 5
Thread Starter 
Leaving Internal PLL Overvoltage at auto seems best for me, Enabling or disabling it results in triple booting.

So far I have tried different settings but with no success except one.

Although it is not recommended here, one of the settings I have used is using the asus cpu level up (4.6G) in the bios settings.
It boots up fine, no kernel error. All settings are at auto. voltage, ram etc.

So great I thought, now this has given me a baseline on which to work with. So I thought I could just fine tune the settings like voltage etc.
But changing the voltage settings from auto to manual/ adaptive results to square 1 - kernel error.

In summary configuring bios with manual settings is possible up to core multi 42.
Increasing core multi to 43+ and changing the settings from auto to manual results in double boots and kernel power events.
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii gtx 780 sli gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 5x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii gtx 780 sli gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 5x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Kernel-Power Critical Event