Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Project Magis: The Caselabs S5 build I'm giving away
New Posts  All Forums:Forum Nav:

[Build Log] Project Magis: The Caselabs S5 build I'm giving away - Page 18

post #171 of 465
Quote:
Originally Posted by luciddreamer124 View Post

As it stands, no. This makes me cautious about installing LED strips in the pedestal, since I don't think they'd look very good shining through the ventilated side panel. However, I have thought about cutting out that mesh and installing a window in the side. The major con to this is that I don't want to have to get the panel re-powder coated, which I would have to do since I wouldn't be able to match with spray paint.

Ideas?

I would leave the logo as the only window of the pedestal and get some blue leds specifically for that. No need to put excessive leds in a place that, for the most part, can't be seen.
THE RoflRig
(23 items)
 
   
CPUMotherboardGraphicsRAM
i5 6600k Gigabyte GA-Z170X-Gaming 6 EVGA GTX 1070 SC Gaming Black Edition 16GB (4x4) Corsair Vengeance LPX (Black) 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate Barracuda 3TB BeQuiet! Dark Rock TF Windows 10 Pro 
MonitorMonitorMonitorKeyboard
ASUS VN247H-P ASUS VN247H-P ASUS VN247H-P Ducky Shine 3 TKL (MX Red), Poker 2 (MX Blue) 
PowerCaseMouseMouse Pad
Cooler Master V850 CaseLabs BH7 Mionix Naos 7000 SteelSeries QcK+ 
AudioAudioAudioAudio
Audeze LCD 2.2 Fazor Mr. Speakers Mad Dog RHA MA750 Schiit Modi 2 Uber 
AudioAudioAudio
Aune T1 Audioengine A2+ (Black) Polk PSW10 
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 6000+ Abit KN9 SLI XFX 8600GT 256MB ADATA 4GB (4x1GB) DDR2 800 
Hard DriveOptical DriveOSMonitor
WD Caviar SE16 250GB Sony Optiarc IDE Combo Windows Vista Home Premium 32bit Hanns-G 17" 8ms 1440x900 
KeyboardPowerCaseMouse
Saitek Eclipse Raidmax 500W Raidmax Smilodon Microsoft Portable Laptop Mouse 
Mouse Pad
Custom Printed Basic Mouse Pad 
  hide details  
Reply
THE RoflRig
(23 items)
 
   
CPUMotherboardGraphicsRAM
i5 6600k Gigabyte GA-Z170X-Gaming 6 EVGA GTX 1070 SC Gaming Black Edition 16GB (4x4) Corsair Vengeance LPX (Black) 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate Barracuda 3TB BeQuiet! Dark Rock TF Windows 10 Pro 
MonitorMonitorMonitorKeyboard
ASUS VN247H-P ASUS VN247H-P ASUS VN247H-P Ducky Shine 3 TKL (MX Red), Poker 2 (MX Blue) 
PowerCaseMouseMouse Pad
Cooler Master V850 CaseLabs BH7 Mionix Naos 7000 SteelSeries QcK+ 
AudioAudioAudioAudio
Audeze LCD 2.2 Fazor Mr. Speakers Mad Dog RHA MA750 Schiit Modi 2 Uber 
AudioAudioAudio
Aune T1 Audioengine A2+ (Black) Polk PSW10 
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 6000+ Abit KN9 SLI XFX 8600GT 256MB ADATA 4GB (4x1GB) DDR2 800 
Hard DriveOptical DriveOSMonitor
WD Caviar SE16 250GB Sony Optiarc IDE Combo Windows Vista Home Premium 32bit Hanns-G 17" 8ms 1440x900 
KeyboardPowerCaseMouse
Saitek Eclipse Raidmax 500W Raidmax Smilodon Microsoft Portable Laptop Mouse 
Mouse Pad
Custom Printed Basic Mouse Pad 
  hide details  
Reply
post #172 of 465
Thread Starter 
Quote:
Originally Posted by roflcopter159 View Post

I would leave the logo as the only window of the pedestal and get some blue leds specifically for that. No need to put excessive leds in a place that, for the most part, can't be seen.

Okay, I would like to have some light on the tubing and pump at the front though. I'm thinking about trying 2 of these in the corners or something
Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
post #173 of 465
Quote:
Originally Posted by luciddreamer124 View Post

Quote:
Originally Posted by roflcopter159 View Post

I would leave the logo as the only window of the pedestal and get some blue leds specifically for that. No need to put excessive leds in a place that, for the most part, can't be seen.

Okay, I would like to have some light on the tubing and pump at the front though. I'm thinking about trying 2 of these in the corners or something

Those could probably work pretty well for that. I don't know how they would mount though, so depending on that, it may make shining the lights on specific parts a bit difficult.
THE RoflRig
(23 items)
 
   
CPUMotherboardGraphicsRAM
i5 6600k Gigabyte GA-Z170X-Gaming 6 EVGA GTX 1070 SC Gaming Black Edition 16GB (4x4) Corsair Vengeance LPX (Black) 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate Barracuda 3TB BeQuiet! Dark Rock TF Windows 10 Pro 
MonitorMonitorMonitorKeyboard
ASUS VN247H-P ASUS VN247H-P ASUS VN247H-P Ducky Shine 3 TKL (MX Red), Poker 2 (MX Blue) 
PowerCaseMouseMouse Pad
Cooler Master V850 CaseLabs BH7 Mionix Naos 7000 SteelSeries QcK+ 
AudioAudioAudioAudio
Audeze LCD 2.2 Fazor Mr. Speakers Mad Dog RHA MA750 Schiit Modi 2 Uber 
AudioAudioAudio
Aune T1 Audioengine A2+ (Black) Polk PSW10 
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 6000+ Abit KN9 SLI XFX 8600GT 256MB ADATA 4GB (4x1GB) DDR2 800 
Hard DriveOptical DriveOSMonitor
WD Caviar SE16 250GB Sony Optiarc IDE Combo Windows Vista Home Premium 32bit Hanns-G 17" 8ms 1440x900 
KeyboardPowerCaseMouse
Saitek Eclipse Raidmax 500W Raidmax Smilodon Microsoft Portable Laptop Mouse 
Mouse Pad
Custom Printed Basic Mouse Pad 
  hide details  
Reply
THE RoflRig
(23 items)
 
   
CPUMotherboardGraphicsRAM
i5 6600k Gigabyte GA-Z170X-Gaming 6 EVGA GTX 1070 SC Gaming Black Edition 16GB (4x4) Corsair Vengeance LPX (Black) 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500GB Seagate Barracuda 3TB BeQuiet! Dark Rock TF Windows 10 Pro 
MonitorMonitorMonitorKeyboard
ASUS VN247H-P ASUS VN247H-P ASUS VN247H-P Ducky Shine 3 TKL (MX Red), Poker 2 (MX Blue) 
PowerCaseMouseMouse Pad
Cooler Master V850 CaseLabs BH7 Mionix Naos 7000 SteelSeries QcK+ 
AudioAudioAudioAudio
Audeze LCD 2.2 Fazor Mr. Speakers Mad Dog RHA MA750 Schiit Modi 2 Uber 
AudioAudioAudio
Aune T1 Audioengine A2+ (Black) Polk PSW10 
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 6000+ Abit KN9 SLI XFX 8600GT 256MB ADATA 4GB (4x1GB) DDR2 800 
Hard DriveOptical DriveOSMonitor
WD Caviar SE16 250GB Sony Optiarc IDE Combo Windows Vista Home Premium 32bit Hanns-G 17" 8ms 1440x900 
KeyboardPowerCaseMouse
Saitek Eclipse Raidmax 500W Raidmax Smilodon Microsoft Portable Laptop Mouse 
Mouse Pad
Custom Printed Basic Mouse Pad 
  hide details  
Reply
post #174 of 465
Lighting it up blue would be uber cool.
post #175 of 465
Quote:
Originally Posted by cpachris View Post

Lighting it up blue would be uber cool.

^ This.
post #176 of 465
One thing you might want to try just to see how it looks is some EL wire just placed around the edges of the pedestal window - they don't give off much at all but it's small and easily placed... might be enough to hit the etching. Also if LEDs are used I would think just a few edgelighting that acrylic piece should make the crest light up but not allow much light-bleeding through the fans/grills in the pedestal... at least I'd love to see what it looks like - even if you didn't go with it in the final run.

And I agree with the comment on the sound card. If someone cares enough about great audio to find the on-board solution inadequate - then they're far more likely to have a particular sound card, outboard DAC, AVR, etc that they would prefer to use anyway. Plus part of the beauty of the build is in the clean looks with great performance... adding a sound card will reduce the former, but not appreciably add to the later.

Looking fantastic so far! Can't wait to see it finished... almost wish I lived near there so I could bid on it myself! Especially if said bid were tax deductible... that would simply be more winning than even Charlie Sheen is capable of grasping! thumb.gif
post #177 of 465
Thread Starter 
Quote:
Originally Posted by DiGiCiDAL View Post

One thing you might want to try just to see how it looks is some EL wire just placed around the edges of the pedestal window - they don't give off much at all but it's small and easily placed... might be enough to hit the etching. Also if LEDs are used I would think just a few edgelighting that acrylic piece should make the crest light up but not allow much light-bleeding through the fans/grills in the pedestal... at least I'd love to see what it looks like - even if you didn't go with it in the final run.

And I agree with the comment on the sound card. If someone cares enough about great audio to find the on-board solution inadequate - then they're far more likely to have a particular sound card, outboard DAC, AVR, etc that they would prefer to use anyway. Plus part of the beauty of the build is in the clean looks with great performance... adding a sound card will reduce the former, but not appreciably add to the later.

Looking fantastic so far! Can't wait to see it finished... almost wish I lived near there so I could bid on it myself! Especially if said bid were tax deductible... that would simply be more winning than even Charlie Sheen is capable of grasping! thumb.gif

Another pro of donating by doing this... tax deductible smile.gif . Thanks for your ideas.

Received my tube bending kit yesterday. I've tried out a couple, it's a little more difficult than I hoped, but not too bad. One thing is that its harder than it looks to pull the bend flush around the 90 degree mandrel. For some reason it tends to over bend and arch out a tiny bit from the mandrel. Also, I'm finding that the E22 tubing blurs slightly around the bend radius. It's not that it bubbled, it just doesn't look clear.





The blurring I'm talking about:


I finished the pedestal tubing. I think it's going to look amazing through that window.










2nd bend. This one is noticeably off (too high on the left side). I'll either cut of a mm at that end or redo it


Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
post #178 of 465
Thread Starter 
I redid the vandal switches today. Replaced the red hdd led with a blue led switch. I also soldered the connections, sleeved them and customized them to length. One of the more aggravating parts of the build so far hmmsmiley02.gif



















Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
post #179 of 465
Nicely done ! How was that porch weather ? chilly n brisk ? sunning it up here in larryville ks at 25f ;-)
Stufzinader
(18 items)
 
Calibri
(15 items)
 
PapaPayne
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS P8Z68-V PRO/GEN3 EVGA SuperClocked 015-P3-1582-AR GeForce GTX 580 G.SKILL Sniper 4x4 F3-12800CL9D-8GBSR2 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 CT256M4SSD2 WD7501AALS Caviar Black WD5002AALX Caviar Black Lite-On iHAS124-04 
CoolingCoolingOSMonitor
Noctua NH-D14 Silverstone AP121-L x 6 Win 7 64bit HP ZR2440w 
KeyboardPowerCaseMouse
Ozone Gaming Gear Strike Mechanical Gaming Keyb... SeaSonic X Series X-850 SilverStone Temjin Series SST-TJ04B-EW Logitech G9x Black Two modes scroll USB Wired L... 
Mouse PadMouse Pad
Zowie Gear G-TF Speed e-Sport Gaming Mouse Pad Ratzpad 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB Western Digital Caviar Black WD5002AALX 500GB 7... Lite-On iHAS124-04 COOLER MASTER Hyper 212 EVO 
OSMonitorKeyboardPower
Windows 7 64 bit HP ZR2440w  CM Storm QuickFire Rapid SGK-4000-GKCL1-US SeaSonic X-850 
CaseMouseMouse Pad
AZZA Genesis 9000 CSAZ-9000B Logictech G9x Zowie G-TF Spawn 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256GB SATA III WD VelociRaptor 600GB 10000 RPM 32MB Cache SATA... LITE-ON DVD Burner XSPC Raystorm Extreme Universal CPU Watercoolin... 
CoolingCoolingCoolingOS
EVGA GTX 680 Hydro Copper Waterblock Lamptron FC8 Fan Controller GELID Solutions Gamer Fan WING 12 Blue UV x 4 Windows 7 Ultimate 
KeyboardPowerCaseOther
SteelSeries Merc Stealth OCZ Fatal1ty 1000W Individually-Sleeved Modular... NZXT SWITCH 810 Gun-Metal PPCS Luxury Single Braided Cold Cathode Kit - U... 
  hide details  
Reply
Stufzinader
(18 items)
 
Calibri
(15 items)
 
PapaPayne
(16 items)
 
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS P8Z68-V PRO/GEN3 EVGA SuperClocked 015-P3-1582-AR GeForce GTX 580 G.SKILL Sniper 4x4 F3-12800CL9D-8GBSR2 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 CT256M4SSD2 WD7501AALS Caviar Black WD5002AALX Caviar Black Lite-On iHAS124-04 
CoolingCoolingOSMonitor
Noctua NH-D14 Silverstone AP121-L x 6 Win 7 64bit HP ZR2440w 
KeyboardPowerCaseMouse
Ozone Gaming Gear Strike Mechanical Gaming Keyb... SeaSonic X Series X-850 SilverStone Temjin Series SST-TJ04B-EW Logitech G9x Black Two modes scroll USB Wired L... 
Mouse PadMouse Pad
Zowie Gear G-TF Speed e-Sport Gaming Mouse Pad Ratzpad 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB Western Digital Caviar Black WD5002AALX 500GB 7... Lite-On iHAS124-04 COOLER MASTER Hyper 212 EVO 
OSMonitorKeyboardPower
Windows 7 64 bit HP ZR2440w  CM Storm QuickFire Rapid SGK-4000-GKCL1-US SeaSonic X-850 
CaseMouseMouse Pad
AZZA Genesis 9000 CSAZ-9000B Logictech G9x Zowie G-TF Spawn 
CPUMotherboardGraphicsRAM
Intel i7-3770K ASUS P8Z77-V DELUXE LGA 1155 EVGA 02G-P4-2683-KR GeForce GTX 680 Superclocked G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 256GB SATA III WD VelociRaptor 600GB 10000 RPM 32MB Cache SATA... LITE-ON DVD Burner XSPC Raystorm Extreme Universal CPU Watercoolin... 
CoolingCoolingCoolingOS
EVGA GTX 680 Hydro Copper Waterblock Lamptron FC8 Fan Controller GELID Solutions Gamer Fan WING 12 Blue UV x 4 Windows 7 Ultimate 
KeyboardPowerCaseOther
SteelSeries Merc Stealth OCZ Fatal1ty 1000W Individually-Sleeved Modular... NZXT SWITCH 810 Gun-Metal PPCS Luxury Single Braided Cold Cathode Kit - U... 
  hide details  
Reply
post #180 of 465
Thread Starter 
Nice to get some fresh air when sleeving every once and a while smile.gif . Similar temp here actually.
Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
Sideous
(12 items)
 
OCN ultimate rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
Ivy Bridge 3770k Asus Sabertooth z77 EVGA GTX 670 FTW Patriot Viper Xtreme 
Hard DriveOptical DriveCoolingOS
Plextor M3 ASUS DRW Custom water cooling Windows 64 bit 
MonitorKeyboardPowerCase
HP 2310m 1080p Corsair K90 Corsair AX850 NZXT Switch 810 Matte Black 
CPUMotherboardGraphicsGraphics
4670k Maximus VI Gene gtx 780 gtx 780 
CoolingCoolingCoolingKeyboard
EK-FC GeForce GTX Titan SE GPU Water Block - Ni... EK-FC Titan SE Backplate - Black X2 EK supremacy clean csq nickel Corsair K70 mx brown 
PowerCase
EVGA 750w CaseLabs Mercury S5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › [Build Log] Project Magis: The Caselabs S5 build I'm giving away