Overclock.net › Forums › Cooling › Water Cooling › Monarch Ram covers side plate screws to short
New Posts  All Forums:Forum Nav:

Monarch Ram covers side plate screws to short

post #1 of 3
Thread Starter 
I recently purchased a set of monarch ram covers to set up for cooling my ram. After opening the package and with out placing the ram inside the cover I found that the three tapered head screw are to short screws they hardly reach the thread on the mounting cover .
I have worked with threads nut bolts for well over 40 years and no one is going to tell me that those supplied screw are the right length as they are not . Half a thread is not secure enough for any thread bolt screw on the planet some one @ EKWB needs to recess the Monarch ram block package and do some measuring
I made my own . There is no way Id ever use a screw that can only be held in by half a turn its just not on thumbsdownsmileyanim.gif
post #2 of 3
post it here

http://www.overclock.net/t/993624/ek-club

you have a better chance of a response from EK themselves smile.gif
LEGION
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7 6700K ASUS Maximus VIII Impact EVGA GTX TITAN X G.skill 16gb 3200 ddr4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 pro 250gb Samsung 840 evo 250gb Samsung 840 evo 250gb Ice kings magic. 
OSMonitorKeyboardPower
WIN 10 Wasabi Mango 42" 4k Corsair k70 EVGA 1000w P2 
CaseMouseAudio
Caselabs Mercury S3 Razer naga :( sennheiser HD 558 
  hide details  
Reply
LEGION
(15 items)
 
  
CPUMotherboardGraphicsRAM
I7 6700K ASUS Maximus VIII Impact EVGA GTX TITAN X G.skill 16gb 3200 ddr4 
Hard DriveHard DriveHard DriveCooling
Samsung 840 pro 250gb Samsung 840 evo 250gb Samsung 840 evo 250gb Ice kings magic. 
OSMonitorKeyboardPower
WIN 10 Wasabi Mango 42" 4k Corsair k70 EVGA 1000w P2 
CaseMouseAudio
Caselabs Mercury S3 Razer naga :( sennheiser HD 558 
  hide details  
Reply
post #3 of 3
Thread Starter 
Just wanted to tell any one that's going to buy these to be careful other wise with a half a turn of thread your going to strip out the thread if your not careful one turn or half a turn of thread is not a good in Aluminum that's a fact so if you buy these take care smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Monarch Ram covers side plate screws to short