I'm new to building rigs and overclocking but I decided to try it out on my new PC. Unfortunately after a few good stress test runs I got this error message on POST:
All settings were reset to default values.
The previous overclock settings have failed, system has been restored to its default settings.
Press F1 to run setup.
Press F2 to load default values and run setup.
Pressing F1 and F2 does nothing. I've tried pressing delete to enter BIOS before this message pops up but that didn't work. I've also tried unplugged both my ssd, hdd and all other peripherals excluding my monitor and keyboard but no dice.
i7 4770k @3.5ghz
MSI z87 g41 PC Mate
Corsair H90 cooler
8gb ram (2x4gb)
Although it's my first time overclocking, I did extensive research and I barely got to 3.9Ghz at .800V before I got into this situation. I know, should've went with another mobo - rookie mistake. I've also tried reseating both ram modules. Any help would be appreciated.