Overclock.net › Forums › AMD › AMD CPUs › Need help with my Opteron 1212
New Posts  All Forums:Forum Nav:

Need help with my Opteron 1212 - Page 2

post #11 of 19
Thread Starter 
Alright so I have it at 2.5 right now.

When i run orthos I get this message:
Code:
More than one CPU detected.
You should run two copies of SP2004 simultaneously.
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15
CPU: 2511MHz FSB: 200MHz [200MHz x 12.5 est.]
CPU: 2511MHz FSB: 200MHz [200MHz x 12.5 est.]
1/4/2007 5:30 PM Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 4 seconds - 1 errors, 0 warnings.
Execution halted.

When I run superpi, i get a message at different lengths of "NOT EXACT IN ROUND!"

Any idea what all of this means? The cpu is at "auto" vcore which cpu-z shows to jump around between 1.32 and 1.36
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
post #12 of 19
Quote:
Originally Posted by Holycow View Post
Alright so I have it at 2.5 right now.

When i run orthos I get this message:
Code:
More than one CPU detected.
You should run two copies of SP2004 simultaneously.
Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15
CPU: 2511MHz FSB: 200MHz [200MHz x 12.5 est.]
CPU: 2511MHz FSB: 200MHz [200MHz x 12.5 est.]
1/4/2007 5:30 PM Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 4 seconds - 1 errors, 0 warnings.
Execution halted.

When I run superpi, i get a message at different lengths of "NOT EXACT IN ROUND!"

Any idea what all of this means? The cpu is at "auto" vcore which cpu-z shows to jump around between 1.32 and 1.36
means your ram is running too tight most likely. or else your proc isn't getting enough voltage. before you run superpi run small fft's in orthos and see if your proc is stable (make sure to drop down your FSB by running a divider). if your proc is stable then you need to either loosen your memory timings or raise the voltage.
The pink bicycle
(13 items)
 
  
CPUMotherboardGraphicsRAM
q6600 @ 3.4 GHz Asus P5N-E Asus 4890 1 gb 2 x 2 GB OCZ Reapers 
Hard DriveOptical DriveOSMonitor
2 x 150 GB Raptors RAID0 work in progress Windows 7 7600 x64 19" Acer LCD 
KeyboardPowerCaseMouse
Microsoft basic Antec 650w my desk mx518 
Mouse Pad
steelpad QcK+ 
  hide details  
Reply
The pink bicycle
(13 items)
 
  
CPUMotherboardGraphicsRAM
q6600 @ 3.4 GHz Asus P5N-E Asus 4890 1 gb 2 x 2 GB OCZ Reapers 
Hard DriveOptical DriveOSMonitor
2 x 150 GB Raptors RAID0 work in progress Windows 7 7600 x64 19" Acer LCD 
KeyboardPowerCaseMouse
Microsoft basic Antec 650w my desk mx518 
Mouse Pad
steelpad QcK+ 
  hide details  
Reply
post #13 of 19
Thread Starter 
alright so going through BIOS to maybe see what the problem was I noticed that Spread Spectrum was enabled. Would this happen to be the main issue behind everything?


EDIT: It is disabled now btw
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
post #14 of 19
Thread Starter 
Alright so here is the thing. When I do the small FFT's on Orthos it runs fine, and for a long time without any mishap. When i change it to the blend, it fails instantly. So the problem is my RAM


Now the confusing thing about that is my ram is set at 5-5-5-15. In BIOS I can set them to auto for everthing, but CPU-Z reads it as 5-5-5-15 anyways. The vdimm right now is a 1.95, so should I up that a bit? Maybe set the timing back to auto?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
post #15 of 19
bring the ram voltage to 2.1-2.2

raise your fsb (250*12= 3ghz)<----- this is an EXAMPLE

make cpu volts about 1.5-1.6

ht link volts about 1.6

nb about 1.3

ht multi at X3

set ram speed to 400mhz

WATCH YOUR TEMPS!!!!!

and presto, u've got a 3ghz overclock

EDIT: if u dont feel confortable with this, try an fsb of 210 instead
Boiled In Water
(13 items)
 
  
CPUMotherboardGraphicsRAM
AthII x4 630 @ 3.6/2.7ghz 1.4v Gigabyte 890GPA-UD3H rev1.0 Gigabyte GTX 550 ti 1gb 1000/2000/2400 G.Skill DDR3 1600mhz 2x2gb 1.5v 
Hard DriveOptical DriveOSMonitor
2x1TB RAID0 WDFALS+Seagate LG DVD+RW Lightscribe Windows 7 Ultimate x64 21.5" Asus 5ms 1080p 
PowerCase
Corsair CMPSU-850TX Antec 300 
  hide details  
Reply
Boiled In Water
(13 items)
 
  
CPUMotherboardGraphicsRAM
AthII x4 630 @ 3.6/2.7ghz 1.4v Gigabyte 890GPA-UD3H rev1.0 Gigabyte GTX 550 ti 1gb 1000/2000/2400 G.Skill DDR3 1600mhz 2x2gb 1.5v 
Hard DriveOptical DriveOSMonitor
2x1TB RAID0 WDFALS+Seagate LG DVD+RW Lightscribe Windows 7 Ultimate x64 21.5" Asus 5ms 1080p 
PowerCase
Corsair CMPSU-850TX Antec 300 
  hide details  
Reply
post #16 of 19
Thread Starter 
Alright maybe to make things easier here is a what CPU-Z is reading my system at now.






Now when I go up to 2.6 GHz it freezes right as Windows starts. Any idea as to what I should do?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
post #17 of 19
is it safe to assume that the new optys dont OC as well at the famous 1xx line?
PURE ACTION!
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 GA-990XA-UD3 NVIDIA GeForce GTX 460 Corsair  
RAMHard DriveOptical DriveOS
Corsair  2x500GB 7200.11 RAID 0 + 320GB 7200.11 1x DVD Windows 7 x64 
MonitorKeyboardPowerCase
22" Acer WS Logitech Ergo 700W OCZ GameXstream Antec 300 
Mouse
MX-600 
  hide details  
Reply
PURE ACTION!
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 GA-990XA-UD3 NVIDIA GeForce GTX 460 Corsair  
RAMHard DriveOptical DriveOS
Corsair  2x500GB 7200.11 RAID 0 + 320GB 7200.11 1x DVD Windows 7 x64 
MonitorKeyboardPowerCase
22" Acer WS Logitech Ergo 700W OCZ GameXstream Antec 300 
Mouse
MX-600 
  hide details  
Reply
post #18 of 19
Quote:
Originally Posted by TheSubtleKnife View Post
is it safe to assume that the new optys dont OC as well at the famous 1xx line?
absolutely not...
http://www.ripping.org/database.php?cpuid=508
post #19 of 19
Thread Starter 
Alright its obvious now that its my memory. Whenever I run orthos with any kind of RAM testing (either blend or the one where it uses some RAM), orthos crashes or the system freezes. I have no problems when I just stress the cpu.

What I can't do in my bios is change the cpu/ram ratio. Does this mean i'm stuck at 2.55 because of my RAM?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Opty 1212 @ 2.85 GHz MSI K9A Platinum Diamond X1950 Pro 512MB 2GB OCZ ATI Certified 
Hard DriveOSKeyboardPower
160 GB Seagate, 250 GB Seagate (PP) Windows XP Professional Logitech 3000 Antec TruePower 550W 
CaseMouse
Thermaltake Tsunami Logitech MX700 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Need help with my Opteron 1212