Overclock.net › Forums › Components › Monitors and Displays › Yamakasi DS270 AH-IPS Monitor 2560x1440
New Posts  All Forums:Forum Nav:

Yamakasi DS270 AH-IPS Monitor 2560x1440 - Page 41

post #401 of 505
Quote:
Originally Posted by Unrealcpu View Post

it is where the camera supposed to go

Or it could be a way the koreans are spying on us

That made my day. Thanks!
post #402 of 505
Quote:
Originally Posted by Unrealcpu View Post

6ms with just DVI-D .
If you start adding more inputs it will go up.


To tell you the truth these korean monitors at 6ms beat out almost every IPS on the market besides a crappy TN

Qnix is supposed to be around 2-3ms , I never noticed any issues with FPS gaming or anything resembles ghosting with the DS270

Get the Qnix if you can put up with inaccurate gamma color shifts and overclock to 96-120hz and hope your monitor doesnt die or get the DS270 with a better and newer panel that is has newer technology built in and go with 60hz

I have a GTX 780 ti and could care less about 120hz , as long as the panel has a low ms you are fine. Anything around 6 ms or lower is fine and most people wont be able to tell a difference in my opinion
6ms of input lag ? have u misured it ?
post #403 of 505
Quote:
Originally Posted by digitalforce View Post

I agree with Unrealcpu on this. I have tested a ton of Korean monitors and IMHO, they are awesome for gaming. I actually had a Trinitron CRT before all this and few TN panels. I will never go back to TN or anything similar..

Thanks

I too have owned a few CRTs back in the day Samsung , Sony G520, FW900 thank god they finally make good monitors . My NEC 2690 wuxi one of the best IPS filters made ATW polarizer was lasted me a good while from 2007 to now which had about 16ms lag.The DS270 is a great improvement just because the res is so high it makes 1080p look awful now in my eyes. When calibrated the blacks look accurate now when i thought the out of the box settings where great but after calibrating it made a difference. For my main living room TV i have owned panasonic plasmas from 2006 PX60 u , V10, GT20, ST30, VT60 "returned" to now my beloved Samsung F8500 plasma

I have seen TN screens and would agree they are awful for picture quality. I just find it funny all these people on the internet trying to find the perfect monitor with less lag or picture quality and it makes me think they have never owned a really good high quality monitor. The DS270 is the best bang for the buck out there period. If i had the cash i would of went with a 1440p NEC that uses the same AH-IPS panel but those run around 1200 bucks on sale.

http://www.newegg.com/Product/Product.aspx?Item=N82E16824002862&ignorebbr=1

i would of though Nvidia G-sync would of been more mainstream by now . I have a feeling new panels will just be released to get close to CRT performance anyway within a few years and G-Sync will just be a forgotten technology . Unless they can market it cheap about 100 bucks that can work on any monitor they might have a chance. But since it only works on TN panels right now i will pass. Hopefully they can come out with a new revision of g-sync to replace the entire mainboard and power supply on these korean monitors . For 100 bucks a kit i would be interested. Until then i am going to pass on that.
post #404 of 505
Quote:
Originally Posted by digitalforce View Post

i1Display Pro Ordered. I'll report back.


have you checked out this video its about PDC from NCX


http://www.youtube.com/watch?v=9hlV1Pq7W3c
post #405 of 505
post #406 of 505
Quote:
Originally Posted by senna89 View Post

6ms of input lag ? have u misured it ?



watch this


http://www.youtube.com/watch?annotation_id=annotation_1962118257&feature=iv&src_vid=36-zYbDuAOM&v=36-zYbDuAOM#t=7m33s
post #407 of 505
WHat ? this is Crossover 2755AMG video not Yamakasi DS270 and it sows 20ms ( crap ).
post #408 of 505
Quote:
Originally Posted by senna89 View Post

WHat ? this is Crossover 2755AMG video not Yamakasi DS270 and it sows 20ms ( crap ).

Its the same panel and tech as the yamakasi

You will have a higher ms with multiple inputs just like any other monitor on the market

I guess you did not hear when it was mentioned that the korean monitors with pdc and ips-ah are better than 99 percent of the monitors out there
post #409 of 505
Same panel but totally different elettronics, not all models with same panel is the same, otherwise can be much different.

Also 2735AMG use same pannel but have 6-8ms of input lag by overclockers.ru
post #410 of 505
Quote:
Originally Posted by senna89 View Post

Same panel but totally different elettronics, not all models with same panel is the same, otherwise can be much different.

Also 2735AMG use same pannel but have 6-8ms of input lag by overclockers.ru



you need to do some more research

ds270 is 6ms

you look at the specifications? If you want 2ms get the qnix just know that your panel is old technology when it comes to color accuracy smile.gifbiggrin.gif
Edited by Unrealcpu - 3/4/14 at 7:17am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Monitors and Displays
Overclock.net › Forums › Components › Monitors and Displays › Yamakasi DS270 AH-IPS Monitor 2560x1440