Overclock.net banner

Compatibility with 4 Rams @ 2133mhz and 8320?

397 views 11 replies 4 participants last post by  F3ERS 2 ASH3S 
#1 ·
Hello,

I have a formula-z motherboard and a 8320 cpu. My question is: will the pc post after getting 16 gb 2133mhz, 4 sticks?
I heard that the 2133 mhz frequency might make the pc no-post as it's incompatible with the 8320 stock ram speed. I do intend to overclock the cpu.

Thanks
 
#4 ·
There have been several people able to get 2400 4 sticks of ram.. 2133 should be doable. you may need to bump up the cpu/nb volts a tad to get it stable

Technically the speed is not in the QVL however I run 2133 cas 8 8 8 24 (only 2 sticks though) on my Sabertooth. I can also get Cas 9 2400 to run. I just don't have any more ram that can clock that high to test further.

Your board is the step up from mine and should be able to fully handle it. You may need to go in to the DIGI options for the RAM and up the strength to handle it. But I am confident that 2400 would work

What cas RAM, as most are 10 or 11. The reason why I put my timings is to show that the IMC of these chips are pretty strong. 2133 Cas 8 for a daily use i very good
 
#5 ·
Quote:
Originally Posted by F3ERS 2 ASH3S View Post

There have been several people able to get 2400 4 sticks of ram.. 2133 should be doable. you may need to bump up the cpu/nb volts a tad to get it stable

Technically the speed is not in the QVL however I run 2133 cas 8 8 8 24 (only 2 sticks though) on my Sabertooth. I can also get Cas 9 2400 to run. I just don't have any more ram that can clock that high to test further.

Your board is the step up from mine and should be able to fully handle it. You may need to go in to the DIGI options for the RAM and up the strength to handle it. But I am confident that 2400 would work

What cas RAM, as most are 10 or 11. The reason why I put my timings is to show that the IMC of these chips are pretty strong. 2133 Cas 8 for a daily use i very good
That is very good on the sabertooth R 2.0. How much voltage do you need for those dimms?
 
#6 ·
Quote:
Originally Posted by hornedfrog86 View Post

That is very good on the sabertooth R 2.0. How much voltage do you need for those dimms?
1.65
 
#8 ·
#10 ·
Quote:
Originally Posted by hornedfrog86 View Post

Thanks!
Not a problem, Mind you I did overclock them so not all results will be the same and just like processors there are lucky chips
 
#12 ·
Quote:
Originally Posted by bugatty View Post

Thank you for the answers
@F3ERS 2 ASH3S nice performance for 2133
Thank you and you are welcome
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top