I do like this case, fits my needs (no 5.25" and few 3.5" + 2.5" hidden away), since I don't need them = less space and to me better looking :-)
Originally Posted by FlyingSolo
I really like the FT05. Love that 90 degree motherboard. But it looks like you can only fit a 360 30mm rad and 120 rad like the FT02. Wish it had more room for at least a 280 rad at top or at least a 240 rad
You with very little modding (take case apart) be able to fit a 2x180mm radiator down of the bottom of the FT02;
Or (remove HDD cage also) a 3x 180mm could be fitted, which many people did, incl my self.
(should never have sold that case
And see below:
Originally Posted by GHADthc
Maybe at some point I will replace the AP181's with 182's, that will depend on how long my next gpu's are.
Also this could be a nice case to watercool in.
Seems that there is room at the bottom for a 2x180mm radiator (which for me is enough since the AP182 can push quite some air if needed
). I'm hoping that is possible, cant really see if the fans goes a little in the back/motherboard plate = much more modding and cutting to get the radiator installed if so.
Maybe place pump/reservoir beside the PSU (if enough space) or at it's back, or some setup down upon the radiator.
And then mod a big window in the side (if a case option doesn't come with that).
I like it (if it comes in white and watercooling is somewhat straight forward
Also, can anyone see where the filters for the 180mm fans are?
Doesn't seem the same way as the FT02. Perhaps they are underneath like may of us modded them to be with the FT02 with magnets Edited by Fruergaard - 1/9/14 at 3:13am