I just installed the 9700 and noticed fan doesnt have 4 pins. I then realized that i cannot controll fan speed within ntune nore bios. The ntune monitor shows cpu rpm at 5600, im thinking this is wrong cause max rpm on the box says 2800 and its very loud at 100%. I didnot install the manual fan controller. Temps at oc 3.2ghz show idle 40C is this normal with 1.31v cpu. Also is there a program that can controll fan speeds by only using 3pins?
post #1 of 11
1/5/07 at 4:47pm