Originally Posted by challenger1
I just received a 120.3 radiator/fan mount for the flex Bay Area of my SMA8 and was wondering if there was a picture or diagram available to show how the fans are mounted to this? Also is the mount screwed in from the front or pushed in from the inside making use of the pegs? I am just mounting 3 fans in there so I would use bolts,washers and nuts to mount the 120mm fans? Also have the radiator fan mount for the lower chamber, what order is that mounted or oriented? Dumb questions I know but any guidance would be appreciated!
For the 120.3 rad flex-bay rad mount, you mount it by pushing it from the inside like all the flex-bay devices.
As for mounting the fans, you have to unscrew the ventilated cover by removing the 6 screws you'll find on the side of the assembly. Then you simply screw the fans on the mount like you would do on the back of a case. Then you put back the ventilated cover in place and secure the rad mount in your case.
For the bottom mount, here's some pictures of a bottom mount on my SMH10 it's the same as an SMA8. Of course you could rotate it if you need more space in the front but it will look the same just that the fans will be a bit more nearer from the back. That's totaly personal.
Just open the pictures in original size Edited by akira749 - 3/27/14 at 5:21am