Overclock.net › Forums › Components › Hard Drives & Storage › SSD › SSD Agility Not working
New Posts  All Forums:Forum Nav:

SSD Agility Not working

post #1 of 3
Thread Starter 
hi everyone

I bought a SSD Agility 4 (120 GIG ) 3 month,s ago . it works good but last night i turn my laptop on and stuck in bios page .
I test it with desktop computer and it,s stuck in Bios page too .

how can i fix this ?

thanks
post #2 of 3
Thread Starter 
please help me
post #3 of 3
There could be dozens of reasons why your PC is no longer booting.

Most likely reason is that your previous Windows installation became corrupted and the boot sector is inaccessible, or the SSD failed and everything is lost.

You can diagnose further by putting it into your desktop PC as the SECOND drive, boot the desktop as normal with it's usual default hard disk. Then see if you can access the filesystem on the SSD. If you get a message that the SSD require formatting or is inaccessible, then you're dead in the water. SSDs are great when they work, but when they fail or something as simple as a power-off event occurs without a proper shutdown, you can lose everything in an instant. Backups are imperative.

If you had a good backup, you could boot off a Windows 7 / 8 recovery DVD and then use the restore process to get your PC back up and running to where it was previously. If the data is intact on the drive, but you just can't boot - a repair process might work.

Greg
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › SSD Agility Not working