Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Calling all case owners I need your help :D
New Posts  All Forums:Forum Nav:

Calling all case owners I need your help :D

post #1 of 11
Thread Starter 
Hi everyone,
Some of you may know I am an artisan on the forums with GPU COOL, and folling on from tbis I am wanting to provide gpu backplates and psu shrouds.

Well this is where where I need your help.

I need everyone to provide the measurements for me to help progress this.
I am needing the following.
The height from the base of your case to the top of your psu.
The gap between the psu and the bottom of the pcie section.
The width from the mb plate to the side panel snd
The lenght that will allow the covering of the psu and cables.

If you could note the name of your case when including these will be great.

If after measuring the lenght and you have an extra 10 cm please can you just note
"Extra 10cm available" even if there is a fan in the floor or removeable hdd rack.

I really need your help guys

I thank everyone in advance.
Edited by richie_2010 - 1/12/14 at 7:25am
post #2 of 11
1) 92mm
2) 14mm OR 4mm to the USB header thing
3) 170mm
4) 260 mm

I have a non removable HDD rack, CM storm Scout
Edited by zemco999 - 1/12/14 at 7:42am
post #3 of 11
Will do this later, have no need for a gpu backplate but a psu shroud design would be great.
post #4 of 11
Thread Starter 
Thanks guys im working on 2 versions of the psu cover so thats why I need to know if an extra 10cm is avalable.
A 3rd idea is coming to mind but im unsure of this one.

Just 2 ask 2mm alu would be strong enough
post #5 of 11
Thread Starter 
Cheers zemco.
With number 2 I was meaning to the peice that supports the graphics cards that comes over the psu.
Sorry should made that clearer biggrin.gif normally their is a 3/4 mm gap between this n the psu.

Thanks for your measurements their similar to what I have.
post #6 of 11
Thread Starter 
TIny bump for evening
post #7 of 11
Thread Starter 
bump for the night.
all help is appreciated
post #8 of 11
bump... anyone going to help him out?
post #9 of 11
Thread Starter 
Cheers zemco.

Ive been so busy I forgot about this thread.
post #10 of 11
No problem. Maybe you should pm people who have bought the GPU mod from you and ask them if they would like to help?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Calling all case owners I need your help :D