Originally Posted by broddam
Ok, mono is in case now. you cant see fromt he pic but there are wires everywhere. I need to figure out where they all go, haha.
Oh, I think you meant the case connectors. Yeah, HDD activity LED, power LED, reset, power, speaker. If you don't care, you can actually make do with just one connector - the power button connector. It doesn't have any orientation (it is a momentary switch, just like the reset button), so you don't have to worry about the + and - posts. You also don't need to worry about orientation on the speaker connector, if you decide to use it.
The others, the LED ones, DO matter which way you plug them in. Check your manual - it should tell you which post, or pin, is positive and which is ground/negative.
If you plug them in the wrong way, everything will be backwards (the HDD light will be on all the time and blink off only during HDD access, etc.).
Obviously that stuff isn't too important for the functioning of your rig, but its up to you.
DO actually be careful, however, you could potentially damage your mobo if you mistakenly connect two positive pins (I speak from experience with that!).