Originally Posted by binaryman6669
How did the build go? I just did a build with the 250D:
Gigabyte Windforce 780 GTX
Gskill 2133 ram 2x8gb
Samsung EVO 750gb SSD
Corsair H100i replaced fans with Noctua NF-F12 fans
Corsair RM750 PSU
Cooler Master 200mm fan in front (bumbed up against ODD slits\holds, but just bent them in)
ASRock Z87E-ITX Mobo
I was concerned about airflow in the case with the windforce since it doesn't exhaust out the back... I figured since it was pulling in cool air off the side window and exhausting into the case, I'd do the same with the H100i, putting the fans to pull in the cool air from the other side window and exhausting into the case. Then I have the cooler master 110CFM blowing all that out the front while pulling a little cool air in from the back 80mm slots. If anyone has thoughts on this for airflow design I'm all ears.. This leaves my case temps a little high (up to 45c in the back above the motherboard, and 35c toward the front nearer the fan).
Nice build and its good to hear that the Cooler Master 200mm will go along with the H100i as this was asked a lot because of the H100i length, and i think i am going to make the H100i exhaust out of the case and will install two 80mm in the back to exhaust the air pushed by the 200mm and the GPU
I live in the middle east so i get my parts through a re-shipping company like MYUS so it takes a lot of time sometimes but here are the pics for the 4770k and the h100i they sent me to prove that they arrived to them!
sorry for the bad quality but they use the worst camera in the worldEdited by Awsan - 2/22/14 at 3:46am