Overclock.net › Forums › Distributed Computing › Distributed Computing - General › [Guide] NVIDIA & AMD PTS GPU Mining
New Posts  All Forums:Forum Nav:

[Guide] NVIDIA & AMD PTS GPU Mining - Page 575

post #5741 of 6478
Quote:
Originally Posted by Ryld Baenre View Post

what is your GPU?

Running five 780's.

This is what the readme says:
Quote:
Example for Yacoin Mining on yac.coinmine.pl pool with GTX 780

cudaminer -s 10 --algo=scrypt-jane -d gtx780 -L 3 -l T9x21 -b 4096 -C 0 -i 1 -m 0 -o stratum+tcp://yac.coinmine.pl:9088 -O workername:password

But it doesn't work.
post #5742 of 6478
Quote:
Originally Posted by Ryld Baenre View Post

cudaminer -s 10 --algo=scrypt-jane -d 0,1 -L 3 -l auto -b x0,x1 -C 2 -i 1 -m 0 stratum+tcp://yac.coinmine.pl:9088 -O Poolusername.workername:password

x0,x1 = amount of ram in the respective cards
Let the card auto tune and then replace "auto" with the autotune setting. I use "k64x2,k20x6", the lowercase k corresponds to high N factor mining on kepler so it will be different for a 780.

See if that works.

where do i get the miner? same miner we used in mining pts?
post #5743 of 6478
I was referring to the asrock boards only. Don't have a link on my phone but it's been brought up a lot.
Quote:
Originally Posted by wholeeo View Post

Quote:
Originally Posted by lightsout View Post

Careful. Many reports of using the onboard molex power and powered risers can fry cards.

ohno-smiley.gif

Really? I have the sata connector plugged into my gigabyte board which also provides extra power to the PCIE slots. Have any links?
Quote:
Originally Posted by Sozin View Post

8.07253236 over here...

Just out of curiosity, does our wallet need to be open when the snapshots happen?

The wallet doesn't have to be open.
X99 Build
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5820k Asus X99-AII Gigabyte GTX 1070 Corsair 16GB 3200MHZ 
Hard DriveCoolingOSMonitor
Samsung EVO 850 250GB Scythe Mugen Max Windows 10 X-Star 1440P 
KeyboardPowerCaseMouse
CM Masterkeys L XFX BE 750W Phanteks Enthoo Pro Tempered Glass Sensei Raw 
Mouse PadAudio
Steelseries Qck Logitech Z313 
  hide details  
Reply
X99 Build
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5820k Asus X99-AII Gigabyte GTX 1070 Corsair 16GB 3200MHZ 
Hard DriveCoolingOSMonitor
Samsung EVO 850 250GB Scythe Mugen Max Windows 10 X-Star 1440P 
KeyboardPowerCaseMouse
CM Masterkeys L XFX BE 750W Phanteks Enthoo Pro Tempered Glass Sensei Raw 
Mouse PadAudio
Steelseries Qck Logitech Z313 
  hide details  
Reply
post #5744 of 6478
Quote:
Originally Posted by Ali Man View Post

Running five 780's.

This is what the readme says:
But it doesn't work.

Try replacing gtx 780 with "-d 0,1,2,3,4"
replace t9x21 with auto to auto tune the cards then replace auto with the results of autotune. it is easiest to autotune each card individually.
-b correspons to memory of your cards in mb, it could be less than 4096 which wouldreturn an error.
it's not just workername:password. It's Poolusername.workername:password (i use the same password for pool and worker).
Errdegahr Ktonos
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570k Asus Sabertooth Z77 EVGA GTX 670 4gb Superclocked EVGA GTX 670 4gb Superclocked 
RAMHard DriveHard DriveHard Drive
Patriot Viper 3 Black Mamba WD Caviar Black OCZ Vertex 3 OCZ Vertex 4 
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 3 MAX IOPS asus bw-12b1st Swiftech H320 Silverstone FHP-141 
OSMonitorKeyboardPower
Windows 7 professional 64-bit Benq XL2420T Corsair K90 Seasonic 860 w Platinum 
CaseMouseMouse PadAudio
Corsair 800D  Logitech G400s Razer Vespula Creative Soundblaster Z 
AudioOther
Sennheiser HD 595 Leapmotion 
  hide details  
Reply
Errdegahr Ktonos
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570k Asus Sabertooth Z77 EVGA GTX 670 4gb Superclocked EVGA GTX 670 4gb Superclocked 
RAMHard DriveHard DriveHard Drive
Patriot Viper 3 Black Mamba WD Caviar Black OCZ Vertex 3 OCZ Vertex 4 
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 3 MAX IOPS asus bw-12b1st Swiftech H320 Silverstone FHP-141 
OSMonitorKeyboardPower
Windows 7 professional 64-bit Benq XL2420T Corsair K90 Seasonic 860 w Platinum 
CaseMouseMouse PadAudio
Corsair 800D  Logitech G400s Razer Vespula Creative Soundblaster Z 
AudioOther
Sennheiser HD 595 Leapmotion 
  hide details  
Reply
post #5745 of 6478
Quote:
Originally Posted by ghostrider85 View Post

where do i get the miner? same miner we used in mining pts?

Get the latest version of CUDAminer from here.
Errdegahr Ktonos
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570k Asus Sabertooth Z77 EVGA GTX 670 4gb Superclocked EVGA GTX 670 4gb Superclocked 
RAMHard DriveHard DriveHard Drive
Patriot Viper 3 Black Mamba WD Caviar Black OCZ Vertex 3 OCZ Vertex 4 
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 3 MAX IOPS asus bw-12b1st Swiftech H320 Silverstone FHP-141 
OSMonitorKeyboardPower
Windows 7 professional 64-bit Benq XL2420T Corsair K90 Seasonic 860 w Platinum 
CaseMouseMouse PadAudio
Corsair 800D  Logitech G400s Razer Vespula Creative Soundblaster Z 
AudioOther
Sennheiser HD 595 Leapmotion 
  hide details  
Reply
Errdegahr Ktonos
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570k Asus Sabertooth Z77 EVGA GTX 670 4gb Superclocked EVGA GTX 670 4gb Superclocked 
RAMHard DriveHard DriveHard Drive
Patriot Viper 3 Black Mamba WD Caviar Black OCZ Vertex 3 OCZ Vertex 4 
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 3 MAX IOPS asus bw-12b1st Swiftech H320 Silverstone FHP-141 
OSMonitorKeyboardPower
Windows 7 professional 64-bit Benq XL2420T Corsair K90 Seasonic 860 w Platinum 
CaseMouseMouse PadAudio
Corsair 800D  Logitech G400s Razer Vespula Creative Soundblaster Z 
AudioOther
Sennheiser HD 595 Leapmotion 
  hide details  
Reply
post #5746 of 6478
Quote:
Originally Posted by Ryld Baenre View Post

Try replacing gtx 780 with "-d 0,1,2,3,4"
replace t9x21 with auto to auto tune the cards then replace auto with the results of autotune. it is easiest to autotune each card individually.
-b correspons to memory of your cards in mb, it could be less than 4096 which wouldreturn an error.
it's not just workername:password. It's Poolusername.workername:password (i use the same password for pool and worker).

Thanks, so I did get autotuning running, but tuning on -L 2 is taking ages, does it usually take that long?
post #5747 of 6478
Quote:
Originally Posted by Ryld Baenre View Post

Get the latest version of CUDAminer from here.

is this batch file correct? my config file is titled cudaminer-yac.cfg

cudaminer.exe --config cudaminer-yac.cfg
post #5748 of 6478
Quote:
Originally Posted by Ali Man View Post

What's your bat for Yacoin, mine doesn't validate on the cpu no matter what I try on the 780's.

Quote:
Originally Posted by ghostrider85 View Post

dual gtx 780,

Quote:
Originally Posted by Ryld Baenre View Post

cudaminer -s 10 --algo=scrypt-jane -d 0,1 -L 3 -l auto -b x0,x1 -C 2 -i 1 -m 0 stratum+tcp://yac.coinmine.pl:9088 -O Poolusername.workername:password

x0,x1 = amount of ram in the respective cards in Mb
Let the card auto tune and then replace "auto" with the autotune setting. I use "k64x2,k20x6", the lowercase k corresponds to high N factor (>12) mining on kepler so it will be different for a 780.

See if that works.

Quote:
Originally Posted by Ali Man View Post

Running five 780's.

This is what the readme says:
But it doesn't work.

Quote:
Originally Posted by Ali Man View Post

Thanks, so I did get autotuning running, but tuning on -L 2 is taking ages, does it usually take that long?

It takes forever but with yacoin you want -L 6 and a hefty core oc. Oc mem too...

Mine does 5.6kh/s with skynet's bios and slight oc whilst being undervolted to 1100mv with precision x.

Try this for size: cudaminer.exe -s 10 --algo=scrypt-jane:xxx -d gtx780 -i 0 -C 2 -b 8192 -L 6 -l t12x32 -o stratum+tcp://xxxxxx:xxxx -u xxx.xxx -p xxx

or

cudaminer.exe -s 10 --algo=scrypt-jane:xxx -d gtx780 -i 0 -C 2 -b 8192 -L 6 -l T12x24 -o stratum+tcp://xxxxxx:xxxx -u xxx.xxx -p xxx
post #5749 of 6478
Quote:
Originally Posted by ivanlabrie View Post





It takes forever but with yacoin you want -L 6 and a hefty core oc. Oc mem too...

Mine does 5.6kh/s with skynet's bios and slight oc whilst being undervolted to 1100mv with precision x.

Try this for size: cudaminer.exe -s 10 --algo=scrypt-jane:xxx -d gtx780 -i 0 -C 2 -b 8192 -L 6 -l t12x32 -o stratum+tcp://xxxxxx:xxxx -u xxx.xxx -p xxx

or

cudaminer.exe -s 10 --algo=scrypt-jane:xxx -d gtx780 -i 0 -C 2 -b 8192 -L 6 -l T12x24 -o stratum+tcp://xxxxxx:xxxx -u xxx.xxx -p xxx


I tried your kernels but they didn't work, I could only get this working with 2/5 of my 780's:



This coin really sucks in finding good launch configs.....
post #5750 of 6478
hmm at the moment i am mining DOGEcoin, with a 697kh/s using CUDAminer.

Is this good?
Turcoman Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
i9 7920x Rampage VI  GTX 1080 Corsair 3000 c15 32gb 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital Blue Seagate Barracuda 7200.14 Samsung 830 128 Sony Blu Ray 
CoolingOSMonitorKeyboard
Corsair h110 8+7+XP BenQ Xl2420T razer blackwidow ultimate stealth 2013 
PowerCaseMouseMouse Pad
Corsair AX1200W Corsair 900D Razer Mamba elite 2012 steelseries QcK+ heavy 
AudioOther
2.1 Speakers Nvidia 3D Vision 2 Kit 
  hide details  
Reply
Turcoman Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
i9 7920x Rampage VI  GTX 1080 Corsair 3000 c15 32gb 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital Blue Seagate Barracuda 7200.14 Samsung 830 128 Sony Blu Ray 
CoolingOSMonitorKeyboard
Corsair h110 8+7+XP BenQ Xl2420T razer blackwidow ultimate stealth 2013 
PowerCaseMouseMouse Pad
Corsair AX1200W Corsair 900D Razer Mamba elite 2012 steelseries QcK+ heavy 
AudioOther
2.1 Speakers Nvidia 3D Vision 2 Kit 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Distributed Computing - General
Overclock.net › Forums › Distributed Computing › Distributed Computing - General › [Guide] NVIDIA & AMD PTS GPU Mining