Originally Posted by GrWorkingClass
Quick question, will the Apache 12cm PWM work with H100i?
Application PC case or heatsink fan
Dimension 120 X 120 X 25mm
Fan speed 600 -1300 RPM
Max airflow 57.53 CFM
Max static air pressure 2.64 mm H2O
Noise level 6.9 -16.05 dB(A)Voltage rating 12V DC
Current rating 0.33A
Bearing HDB (Hydro Dynamic)
Fan life expectancy 50,000 hours
Connector 4pin PWM
Product code AK-FN058
I read online that H100i can hold up to 4 watt for both of the fans. If the Apache will use 0.33A * 12V = 3.96W each (!) is it going to be burn H100i?
There are examples where cooler master led 120mm fans burnt it
I thought I read somewhere that it was 1A per fanport
Originally Posted by Torvi
i dont really undearstand why you want to go for slower fan with lower air pressure than the stock ones.
Looks perhaps or noise level.
I personally also ordered some fans with "lower" pressure, but the pressure at the speed they are running is higher than the stock ones at the same speed, and they are quieter. I'll let mine run at 700-1000 to have my quiet. If now I'd like to turn the thing up a notch, I'll switch back to stock because at their 12v speed, they are apparently quite ok.