Overclock.net › Forums › Intel › Intel Motherboards › ASUS P5N-E SLI 650i Thread
New Posts  All Forums:Forum Nav:

ASUS P5N-E SLI 650i Thread - Page 891

post #8901 of 9621
I meant that rest of the components are under 30c. Cpu at idle is around 21c, whilst my room temperature is 18c.

Edit: If the drivers dont cause any trouble while having bios at default, could they cause after I change bios settings?


The voltages I just tried to put near stock, maybe undercutting it by a bit. Tho Im conserned about my vdroop. Is 0,05-6V too much?


-One other weird thing is that on "Auto" settings my bios wants to put my memory running 667 / 5-5-5-15 1T. Why is that?


One more =p What can cause my board not being able to boot with any amount of Fsb from 1501, highest amount I've tried to get past this "hole" was 1850, more wouldn't help would it?
Ive also tried upping voltages but no help.
Edited by Hakfu - 4/17/09 at 9:09am
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
post #8902 of 9621
so if i leave the mem linked, just adjust the fsb and the mem will adjust accordingly?
correct me if im wrong...
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
post #8903 of 9621
If I've understood correctly, the only problem would be that you could easily blow up your mems like that.

Tho, Im clearly no expert in this subject.
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
post #8904 of 9621
thats were i get confused
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
post #8905 of 9621
You should confim this from somewhere. But I think its that you do not want to overclock your memory so much, cause it doesn't need it nor handle it. So if you have synced mode and don't count everything carefully you might raise your memory clock too high causing a screw up. So you better go unlinked mode or count everything so that your fsb will be as high as you want but still having a rational memory clock.

Many people for example run in 1:1 mode with 1600fsb and 800mem.
(As you probably know, fsb is quad pumped and memory dual. So you need to divide fsb by 4 and mem by 2 to get the comparative amounts.)


Ps. Still hoping to get responses to my post 8814
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
post #8906 of 9621
I believe when in auto mode your memory is set to its most stable clocks, my memory stock speed is 4-4-4-12 at 2.1 volts stock, but my mobo stock mem
volts was 1.8 therefore it wanted to run my mem at 5-5-5-15 until i set my
mem voltage to 2.1 them i could set my timings accordingly, anyone feel free to correct me if im wrong,

so your saying leave my bios memory setting at 800mhz unlinked and just bump my fsb in small increments?, or set it to 400 or 533 and then bump my fsb?
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
post #8907 of 9621
If I were you I'd leave it at 800Mhz Unlinked mode and bump your fsb in small increments.

Thought, as said earlier. I am a newbie at overclocking too so..


Ps. Still hoping to get responses to my post 8814
Edited by Hakfu - 4/17/09 at 1:05pm
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
Meh babeh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 P5N-e Sli GF 9800Gtx+ 2x Kingston 2G Kit 800Mhz DDR2 NON-ECC Low-Latency 
Hard DriveOSMonitorKeyboard
Samsung T166 7200rpm Vista Home Prem 32bit Samsung 226bw Logitech G15 
PowerCaseMouseMouse Pad
Corsair 520hx Antec 182b Logitech Mx518 Func F30r 
  hide details  
Reply
post #8908 of 9621
overclocking this thing has been an obsesion of mine and i need to get it cured, i can overclock the crap out ov my vid card so naturally i want the most out of my cpu, il try leaving it at 800mhz and just bump the fsb, well see what happens
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
post #8909 of 9621
Thread Starter 
In the 3rd post on the front page of this thread, I quote myself:
Quote:
  • When overclocking, run a 1:1 divider for stability. This can be achieved by using UNLINKED mode and MANUALLY entering 1:1 values, ie 1000FSB and 500DDR, or you can choose LINKED-->SYNC Mode to run a 1:1 divider.
  • AUTO will keep your FSB/RAM linked, which is bad because it will constantly run a 1:2 divider due to the BIOS displaying QDR and DDR values.
There is a LOT of info on the first 3 posts... specifically the 3rd one.
Tribeca's overclocking guide is there as well.
Please read in thoroughly.




On another note, how was everyone's easter?
    
CPUMotherboardGraphicsRAM
D820 2.8 300x14 = 4.2Ghz (50%OC) P5QC EVGA 8800GT 4GB (2x2) Ballistix Tracers 
Hard DriveOptical DriveOSMonitor
320 West.Dig. SATA Samsung CDRW-DVDRom/HP DVD Writer(LightScribe) XP-SP3/Ubuntu-Ibex/Win7 19" Acer WS & 42" Plasma 
KeyboardPowerCaseMouse
Micro Innovations Multimedia GS 600 Antec 900 (See Gallery!) Microsoft USB Optical 
Mouse Pad
Keyboard Tray FTW! 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
D820 2.8 300x14 = 4.2Ghz (50%OC) P5QC EVGA 8800GT 4GB (2x2) Ballistix Tracers 
Hard DriveOptical DriveOSMonitor
320 West.Dig. SATA Samsung CDRW-DVDRom/HP DVD Writer(LightScribe) XP-SP3/Ubuntu-Ibex/Win7 19" Acer WS & 42" Plasma 
KeyboardPowerCaseMouse
Micro Innovations Multimedia GS 600 Antec 900 (See Gallery!) Microsoft USB Optical 
Mouse Pad
Keyboard Tray FTW! 
  hide details  
Reply
post #8910 of 9621
i hear ya, sorry about the lame questions after about 50 pages it all starts to blur
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
SHRED INC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6420 oced 3.0 for now P5N-E SLI EVGA GTX 260 superclocked core 216 4 GIGS PATRIOT EXTREME 800MHz 4-4-4-12 2.1V 
Hard DriveOptical DriveOSMonitor
500 SATA 3.0 WESTERN DIGITAL AOPEN DVD WRITER VISTA ULTIMATE 32BIT 19 WIDESCREEN HANNS-G 
PowerCaseMouse
ANTEC 650 WATT QUAD 12V RAILS FULL TOWER ULTRA ALUMINUS MX518 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › ASUS P5N-E SLI 650i Thread