Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › EVGA Hadron Air - "HellBoy"
New Posts  All Forums:Forum Nav:

EVGA Hadron Air - "HellBoy" - Page 4

post #31 of 47
Is this still being worked? smile.gif
post #32 of 47
Thread Starter 
Quote:
Originally Posted by Lazer1337 View Post

Is this still being worked? smile.gif

Yes it certainly is, check the imgur link on the main post for photos, as it is hard to update on my iPad frown.gif

But I'm sanding the red paint today and giving the pieces another coat!

Also got the rad and fans mounted in the top and the mobo fits. So for those who are happy to mod the fans, then watercooling is definitely possible wink.gif

I decided the aluminum plate was too thin and got some sheet gal to replace it.

Pump and res came, a lot bigger than expected, but I'll manage smile.gif

I also ordered my CPU, a 500gb samsung 840 evo ssd, 16gb corsair LP and my 30cm red led stip.

In the process of ordering my gtx 780 once the XSPC backplate and water lock are in stock with pccg.

Other than that, got 10 more meters of MDPC red sleeve, so I'll finish the 24 pin as well. Can't be bothered sleeving the sata and molex as I, only using one of each and can hide them easily enough.

Thanks again for the support smile.gif
    
CPUMotherboardGraphicsRAM
Intel core i5-6600K Gigabyte Z170 Gaming 5 AMD Fury X Corsair LP 2 x 4GB 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung M.2 NVME SSD 256GB Custom Loop Windows 10 Benq 27" 1440p Freesync 
PowerCase
Silverstone 600W SFX PSU Project mATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel core i5-6600K Gigabyte Z170 Gaming 5 AMD Fury X Corsair LP 2 x 4GB 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung M.2 NVME SSD 256GB Custom Loop Windows 10 Benq 27" 1440p Freesync 
PowerCase
Silverstone 600W SFX PSU Project mATX 
  hide details  
Reply
post #33 of 47
Subbed! I am currently doing a project using the Hadron Air case. I am just having troubles looking for a rad that would fit on top, inside the case. Couldn't find any seller that have the Black Ice Pro II. That is the only component that I am having troubles at.
post #34 of 47
So i got curious earlier about any rads that would fit on the case, I tried searching for a 1" thick rad a few months ago, and I ended up bumping on dangerden's website. In their site, it says "out of stock" when i first visited the page, but today, they have it available!
http://www.dangerden.com/store/black-ice_pro-ii-radiator.html#tabs
I tried to click that "Add to cart" button, but it directs me to an html thingy. Their servers might be down. I'll try to order one as soon as i get out from work.
post #35 of 47
Just confirmed, although i did not receive any errors when adding it to my cart.
post #36 of 47
danger den closed down awhile ago man
post #37 of 47
Thread Starter 
http://www.frozencpu.com/products/4083/ex-rad-84/Black_Ice_GT_Stealth_240_Radiator_-_Black.html#blank


That is what i used and i can confirm that it fits!

Also a few photos went up aswell in my updates post. It's a lot easier updating seeings as im on the computer now wink.gif
    
CPUMotherboardGraphicsRAM
Intel core i5-6600K Gigabyte Z170 Gaming 5 AMD Fury X Corsair LP 2 x 4GB 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung M.2 NVME SSD 256GB Custom Loop Windows 10 Benq 27" 1440p Freesync 
PowerCase
Silverstone 600W SFX PSU Project mATX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel core i5-6600K Gigabyte Z170 Gaming 5 AMD Fury X Corsair LP 2 x 4GB 3000Mhz 
Hard DriveCoolingOSMonitor
Samsung M.2 NVME SSD 256GB Custom Loop Windows 10 Benq 27" 1440p Freesync 
PowerCase
Silverstone 600W SFX PSU Project mATX 
  hide details  
Reply
post #38 of 47
Quote:
Originally Posted by tysonischarles View Post

http://www.frozencpu.com/products/4083/ex-rad-84/Black_Ice_GT_Stealth_240_Radiator_-_Black.html#blank


That is what i used and i can confirm that it fits!

Also a few photos went up aswell in my updates post. It's a lot easier updating seeings as im on the computer now wink.gif

Are you sure that it fits buddy? I am wishing you all the luck in the world for that rad to fit in there since i will be doing the same configuration for my build.
post #39 of 47
Ignore my last post. Dang it fits! Do you think 2 more modded scythe fans will fit inside for a push/pull config?
post #40 of 47
Quote:
Originally Posted by kazuma16 View Post

Are you sure that it fits buddy? I am wishing you all the luck in the world for that rad to fit in there since i will be doing the same configuration for my build.
I think he had to dremel his fans to make it work and its only 2 that will fit
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Small Form Factor Systems
Overclock.net › Forums › Specialty Builds › Small Form Factor Systems › EVGA Hadron Air - "HellBoy"