Hey guys, I've updated the build log a bit more on the first page (in order to keep everything together), and reorganized a few things as well.
I have some idea's in mind for a few mods that I really want to do... I essentially plan on turning this case from a mini-ITX into a mATX. I want to do this so that I can SLi two cards, while keeping the tiny shape of the Hadron.
I've been contemplating trying to do this for quite some time now, but I need to get some idea as to the clearances that I have to play with before breaking down and buying a couple new boards for test fits. To do this though, I would need to remove the current PSU, and mount a different one in the front of the case, likely an SFF, assuming I went with a slim mATX board.
I plan on going back to my top-mounted 240 rad, with slim Scythe fans, and a full water loop which would cool the CPU and both GPU's. I figure with water blocks on both GPU's, it should save me a little bit of space, but I don't want things to be too cramped.
I've seen a couple people try to mount PSU's right above the motherboard, but with the fact that I want to use an Apogee Drive 2 block/ pump, I doubt that I would have the clearances necessary for it.