Overclock.net › Forums › Components › Memory › Corsair Dominator Platinum Overclocking question
New Posts  All Forums:Forum Nav:

Corsair Dominator Platinum Overclocking question

post #1 of 8
Thread Starter 
Hey so helping a buddy out with his build and we are testing a 2x8gb 9-9-9-24 1600MHz kit of the CDP memory for overclocking
Last night we put the memory to 2133MHz 10-11-11-32 @1.65v but the voltage is drawing at 1.67v in the bios will this be ok? or will it damage the memory?

Thanks

The Processor is a i7-4770k running at 4.0ghz @ 1.125v
post #2 of 8
It shouldn't damage the memory as long as there is any airflow around it.
If you can tell the version number of your kit (ver x.2x, written on the sticker) then it could become clearer as to how to get better results of out the kit, else it is just trial and error.
post #3 of 8
Thread Starter 
I will post it tonight
post #4 of 8
Thread Starter 
They are version 2.59
post #5 of 8
You can also try DDR3-2400 with 11-13-13 or 11-13-12 at 1.65V. Going lower in timings at 2133 or 2400 will require Hynix MFR chips (is what you have on ver5.29) of better quality, which I am not sure if you are going to find on 1600C9.
post #6 of 8
Thread Starter 
Quote:
Originally Posted by Sam OCX View Post

You can also try DDR3-2400 with 11-13-13 or 11-13-12 at 1.65V. Going lower in timings at 2133 or 2400 will require Hynix MFR chips (is what you have on ver5.29) of better quality, which I am not sure if you are going to find on 1600C9.

Just set them to 11-13-13-31 booted into windows

Is there a stability test I can run to serif they are stable at 2400mhz?
post #7 of 8
Thread Starter 
Quote:
Originally Posted by cdnGhost View Post

Just set them to 11-13-13-31 booted into windows
Quote:
Originally Posted by cdnGhost View Post

Just set them to 11-13-13-31 booted into windows

Is there a stability test I can run to serif they are stable at 2400mhz?

Just used 11-13-12-31 and it booted up np again
Also have the processor set up at 4.6ghz with the memory at 2400mhz
Edited by cdnGhost - 3/6/14 at 5:48pm
post #8 of 8
Thread Starter 
I decided to try a lower voltage and speed, running 1866 @ 9-10-9 27 1.5v
Thanks for pointing me in the right direction!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Corsair Dominator Platinum Overclocking question