Overclock.net › Forums › Cooling › Air Cooling › Hyper 212 Evo stock fan + noctua fan = push/pull? *attached pictures/results*
New Posts  All Forums:Forum Nav:

Hyper 212 Evo stock fan + noctua fan = push/pull? *attached pictures/results* - Page 2

post #11 of 18
Thread Starter 
1.) TEMPS AT IDLE


2.) TEMPS AT LOAD AFTER AN HOUR



3.) PRIME 95 RESULTS (BLEND TEST)

Edited by jsx821 - 3/9/14 at 7:21am
post #12 of 18
Quote:
Originally Posted by jsx821 View Post

1.) TEMPS AT IDLE


2.) TEMPS AT LOAD AFTER AN HOUR



3.) PRIME 95 RESULTS (BLEND TEST)

Damn, why haswell gets so hot? My 125Watts FX oced at 4,3 ran at 50 degrees with the Hyper 212 Evo.

I've used a Hyper 212 Evo with push pull config and the second fan can help lowering some degrees, but dont expect magic, my temps went from 53-54 to 48.

What I did was just pick a random fan I had here lying arround and attached it to the heatsink, you will probably get better temps with a better quality fan.
post #13 of 18
Thread Starter 
Quote:
Originally Posted by danilon62 View Post

Damn, why haswell gets so hot? My 125Watts FX oced at 4,3 ran at 50 degrees with the Hyper 212 Evo.

I've used a Hyper 212 Evo with push pull config and the second fan can help lowering some degrees, but dont expect magic, my temps went from 53-54 to 48.

What I did was just pick a random fan I had here lying arround and attached it to the heatsink, you will probably get better temps with a better quality fan.

Thanks.. maybe I should get some AS5 as well. Do you think I can get to 4.2-4.4 overclocked on low voltage?
post #14 of 18
Quote:
Originally Posted by VindalooJim View Post

Haswell should not be kept "or around 80c" Haswell should always be kept under 80c for 24/7 use.

That is why I said "If you are not running Haswell and the CPU is below or around 80°C then I wouldn't bother, also 80°C is fine for haswell

Quote:
Originally Posted by jsx821 View Post

Warning: Spoiler! (Click to show)
1.) TEMPS AT IDLE


2.) TEMPS AT LOAD AFTER AN HOUR



3.) PRIME 95 RESULTS (BLEND TEST)
]

Your temps look fine, now OC the chip, try and keep the CPU below or around 80°C thumb.gif
post #15 of 18
Thread Starter 
Thanks! biggrin.gif:thumb:
post #16 of 18
Thread Starter 
Tried overclocking 4.2ghz at 1.50--- got BSOD.
Got it OC'ed to 4.2 ghz @ 1.159V. Seems stable for now.. It idles around 37deg celsius.
Load Max temp on single core is 80c. Load Min temp on single core is 74c.
Kinda saddens me that I got a below average chip.
post #17 of 18
Quote:
Originally Posted by jsx821 View Post

It's been running for about 30mins and core package value temp is at 58-60c for last 20mins. Is this stable? VID is at 1.067V

Edit: Missed the 2nd page lol, OP try 4.5 @1.2v, that's a way of seeing how good your chip is
Edited by BenJaminJr - 3/16/14 at 8:19am
post #18 of 18
Thread Starter 
I can't even OC 4.2 @ 1.2V. Sucky chip frown.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Hyper 212 Evo stock fan + noctua fan = push/pull? *attached pictures/results*