Originally Posted by TheAmusingNerd
Originally Posted by Cyro999
What vcore is that at?
Add LLC if you can, if not there's very likely nothing that you can do
This board only supports auto voltages. If I up the base clock, would that gain me anything?
In my experiments, there was no chance to have it running stable with less voltage than it needs for a certain speed by using the base clock over the multiplier. What I mean is, if it does need a specific Vcore voltage to run a 44 multiplier at 100MHz base stable, it will need the same voltage to run a 43 multiplier at 102.3MHz (that also ends up being 4400MHz).
You should try it as it might behave differently for you with your Auto voltage stuff, but those 102MHz base clock also play a role for the connection to the graphics card and connection to the PCH or something, and it might give you problems over there.