Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Koolance fan shround measurement question
New Posts  All Forums:Forum Nav:

Koolance fan shround measurement question

post #1 of 4
Thread Starter 
I am trying to fit my 360mm rad into my new 750d. What I want to do is use one of the Koolance fan radiator shroud. However the 120mm variant would not fit the top of the case very well, the 140mm will fit perfectly. Looking at pictures of the shroud, there is the space to put the fan, but the undrilled sunk portion were it gets smaller is what I want to know.

In this pic, the yellow line, is there 105mm? If so that would allow you to drill and use a 120mm fan on the shroud, and just use 140mm grills. If you have one, could you please measure it......PLEASE!!!!

post #2 of 4
Will this give you what you need?

http://koolance.com/3-x-120mm-fan-radiator-shroud-black
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
post #3 of 4
how bout this

Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
Ryzen Shine!
(14 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 1800X @ 4125mhz 1.432 Volts MSI X370 Titanium   Fury  G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin... 
Hard DriveOptical DriveCoolingOS
Samsung 850 pro Hp 1260 I liquid unobtanium Koolance 480mm radiator, 39... Win 7 HP/Winspy 10 64bit 
MonitorKeyboardPowerCase
24" hp @ 1900x1200 Logitech G19 PC power and cooling 910 watt silencer Thermaltake P5 
MouseMouse Pad
Logitech MX 518 fUnc industries 
  hide details  
Reply
post #4 of 4
Thread Starter 
The first one yes, the second not so much, the one you showed is the 120mm version.

However with the link you gave me I got the diagram for the 140mm version. Saved the picture and zoomed so that the 125mm was equal to that of my ruler, I then put the ruler and measured 105 to the very center. It may actually fit, may need to drill out a slight portion but I think it may fit. Thank you very much, + rep...
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Koolance fan shround measurement question