Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › 750D: BF4 Project Adapt
New Posts  All Forums:Forum Nav:

750D: BF4 Project Adapt - Page 2

post #11 of 15
Thread Starter 
Ha thanks guys, can't wait to start working on the camo. Still a ways to go. If anyone has any dead matx mobos laying around hit me up need one for alignment. Hopefully getting back to work this weekend (working 12 hr shifts till Saturday).
     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
post #12 of 15
Thread Starter 
I haven't done much the last week, just got out of 12 hr days. Today I made template for the other side of the case cover on plexi (this time I'm gonna try to make the cuts with a jigsaw instead of dremel.

  • Design for back side cover

A92593CE-13AA-4A82-BC93-1A1F621D65E8_zpslhsmnsiy.jpg

  • Bracket for Motherboard Tray Support(Still have to cut)

13290A94-7BC1-433A-94E4-4247B1DF36A6_zps4oyehhgh.jpg


I've attached the top panel so I can install top rad and start working on alignment for front mounting rad. I'll keep you guys updated.
     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
post #13 of 15
Thread Starter 
  • Installed the rad and fan to get an idea on placing, will have to drill new screw holes for rad (placing it further towards the back so I can mount second rad up further on the front plate)



  • To give you an idea where second rad will be mounted I just drew a template to give you the idea, pump will be up a little higher so it feeds right into the rad.



  • Pump will be mounted to motherboard tray. Looks like it's going to be a tight fit with pump and where I have to cut for sata cables, I should have enough room though.

     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
post #14 of 15
Thread Starter 
  • Finally got to drilling and threading for the motherboard standoffs.



  • cut the radiator holes out and drilled for the rad.



  • Radiators Installed. It aligned perfectly up to where I plan to mount the pump(either getting a Long male to male adapter or use a little tubing).





     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
     
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
MotherboardGraphicsRAMCooling
ASUS M4A79Xtd EVO EVGA GTX 280 SAMSUNG 2x4gb DDR3 1600 HYPER 212 EVO 
OS
Windows 7 64bit 
  hide details  
Reply
post #15 of 15
Subbed. Looking forward to seeing where this goes! thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › 750D: BF4 Project Adapt