Thanks for the reply.
It looks as one of the pumps Aquabus has failed.
The pump is no longer recognised using USB or the 4 pin via Aquabus,
So after taking so long to build, I have to strip out one of the loops.
The perks of watercooling
Are there any other tests I can do b4 stripping out and RMAing?
Did you set separate USB addresses for the pumps? After setting USB address change control priority to Aquabus (you can leave the USB cables connected). If you do not see what you expect then reboot the system.
Any known issues with Aquasuite 2014 - 1.3 and OHM 0.6.0 Beta? Did a reinstall of the OS after new build, installed Aqua and OHM but OHM no longer shows in Aqua. OHM is getting updates from the motherboard and I know Aqua is talking to the motherboard/OS, not sure what's up or if I missed something.
I would recommend you install HWInfo64 as the sensor monitoring software, it provides a lot more info and interfaces with Aqua Suite without problems.
The only problems I have encountered with Aquasuite 2014 - 1.3 is occasionally I do not get all MPS devices, I restart the program (Aqua Suite) and it's normally OK, if not I reboot.