I have a couple questions regarding Fan settings in Aquasuite > Aquaero > Fans > Settings:
What does checking the "Hold minimum power" selection box do?
And does selecting Speed controlled in Advanced settings take priority over Fan settings, with Hold minimum power ignored?
EDIT: did what I should have done initially, read the manual (underscoring mine).
Edited by InfoSeeker - 10/28/15 at 8:31am
13.1. Minimum and maximum power
For each fan output, the output range can be limited in both directions
(“Minimum power”/”Maximum power”). The check box “Hold minimum pow-
er” determines fan output behavior while the assigned controller output value
is below the minimum power setting: If the box is not checked, the fan output
will switched off. If the box is checked, the fan output will be set to the mini-
mum power value and remain active. Set minimum power to a value at which
the connected fan or pump reliably starts up.
13.2. Power, speed or PWM controlled mode
In “power controlled” mode, an output value from a controller will be linearly
converted to the range between minimum and maximum power of the fan
output and the corresponding voltage will be set.
In “speed controlled” mode, an output value from a controller will be linearly
converted to the range between configured minimum and maximum speed of
the fan output. The aquaero will adjust the output power (voltage) au-
tonomously within the configured range of minimum and maximum power to
maintain this fan speed.