Overclock.net › Forums › Cooling › Water Cooling › OCN Aquaero Owners Club
New Posts  All Forums:Forum Nav:

OCN Aquaero Owners Club - Page 864

post #8631 of 11169
Quote:
Originally Posted by phatDUB View Post

This smile.gif I cannot finish my Order as im afraid I cant do the stuff mentioned above...

Forget the tube sensors as latest update did away with them!!

Pumps are set and forget and you can do everything you want from the 5 xt
post #8632 of 11169
Hello,

I decided that is time to try the Aquaero 6XT, but I have a few questions before I make my purchase.

The parts that I'm going to need to control are:
20 x Sunon fans with the following specs:

Size (mm): 120x120x25
Rated voltage: 12VDC
Operating voltage range: 6-13.8 VDC
Rated current: 451 mA / Max 519 mA
Rated power Consumption ( W ): 5.40 W / Max 6.22 W
Starting voltage: 6VDC
Air flow: (m3/h): 183.8
Rated speed: (RPM): 3100
Static pressure (cm-H2O): 0.71
Wiring: 3-wire (Frequency Generator)
Automatic restart: Yes

You can check detail specifications of the fans here: SUNON

The pumps that I have are: EK-BAY RES Dual DDC 3.25 Serial (incl. pump)


The pump used in the res/pump combo is this type: EK-DDC 3.25 (12V DC pump)

It has the following technical specs:

- Dimensions (W x D x H): 90 x 62 x 38 mm
- Motor: Electronically commuted ball bearing motor
- Rated voltage: 12 V DC
- Power consumption: 20 W
- Maximum head pressure: up to 7.0m
- Maximum flow rate: up to 1000 L/h
- Maximum liquid temperature: 60°C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector: 4-Pin Molex- and 3-Pin DC FAN connector

My concern is whether I'm going to be able to control all the fans and pumps with the aquaero 6 xt or I will have to buy the poweradjust 3 USB ultra version.

I plan to purchase the farbwerk USB, Bluetooth and aquabus version to control about 2 meters of RGB LED strip.

I also want to monitor 4 temps with inline temp sensors and have one flow sensor, but I don't know which one to choose and is the Aquaero going to handle all of fans, pumps and sensors.

For now I think to order the aquaero 6 XT USB fan controller + Front plate for aquaero 5 und 6 XT aluminum black + Passive heat sink for aquaero 6, red + Replacement front new design for aquaero 5 und 6 XT (red LEDs), but if I have to purchase something else please tell me so I don't have to pay again for shipping.

Thank you in advance for the help.
post #8633 of 11169
Quick question. Can you daisy chain Aquacomputer HUBBY7 (Combine two on one header)? I have about 8 USB 2.0 cables and only have two USB 2.0 headers on my Motherboard.
post #8634 of 11169
Quote:
Originally Posted by Revan654 View Post

Quick question. Can you daisy chain Aquacomputer HUBBY7 (Combine two on one header)? I have about 8 USB 2.0 cables and only have two USB 2.0 headers on my Motherboard.

It comes with a 5 pin cable so yes. As long as your motherboard has enough available resources to allocate for the 2 hubs.That depends on how many other USB 2.0 devices, and other hubs you have connected.
post #8635 of 11169
You could also connect one HUBBY7 to another HUBBY7 biggrin.gif

In this case I recommend to use the SATA power for the "master device" if you use all ports. Depending on which devices you connect you could run into a technical limitation of the USB port. Some devices have a high polling rate. If you connect a lot of them to one port the available bandwidth could become a problem.
post #8636 of 11169
I'm looking to purchase some flow sensors. I would just buy the aquacomputer flow sensor but I need three sensors and I wouldn't be able to stand 3 of them clicking away. I know it takes a certain amount of flow to make them click so I guess i could get away with them. I just don't feel like they should click at all it's just an impeller spinning. There must some play around the bearing where the impeller sits or something. Anyone know of a good flow sensor to use?
post #8637 of 11169
I just finished upgrading my daily driver from soft to hard tubing. I also changed the fans to Corsair ML PROs, Now I can't get the AQ6 or the Farbwerk to work. The fans are spinning at full speed, so I can tell the AQ6 is getting and passing power, but the display is off and Aquasuite says it's disconnected from USB. It says the same about the farby, although the leds are on (including an additional strip I put in, which is stuck on green until I can regain control).

Before the rebuild, I had everything connected through both USB and Aquabus. I took out all the aquabus extensions and Y's and replaced them with a Splitty9. I can't tell if that part worked or not, because of the AQ6's refusal to start. All my AC devices (AQ6 Pro, Farbwerk USB, High Flow USB, 2x aquabus pumps) are connected to an NZXT USB hub. It's the same hub I've had for over a year, linked to the same devices with the same cables. However, only the pumps and flow sensor seem to be recognized, the Aq6 and farbwerk aren't. This is what I have done so far to troubleshoot the problem:
- Connect one of the known working pumps to every port on the USB hub to see if they all work. They do
- Connect the AQ6 (and later the farbwerk) to every single port on the hub to see if they might work on some. They don't
- Remove the USB cables from both devices and test each wire/pin for continuity, Both pass
- Try to connect the stubborn devices using different cables. The farbwerk worked for a while (one boot-test-off cycle), the AQ6 didn't
- Temporarily connect everything to a NIB nzxt hub I had lying around. Same problem

I'm stumped! Any ideas?

EDIT: remove duplicate paragraph
Edited by jvillaveces - 10/6/16 at 3:55pm
Eldorado
(24 items)
 
Quantum
(24 items)
 
Overkill HTPC
(18 items)
 
CPUMotherboardGraphicsGraphics
i7 4790k Asus Z97-Deluxe EVGA GeForce GTX980 Ti SC ACX2.0 EVGA GeForce GTX980 Ti SC ACX2.0 
RAMHard DriveHard DriveOptical Drive
Corsair Dominator Platinum 2133 MHz Intel 730 Samsung 850 Pro Asus DRW-24B1ST 
CoolingCoolingCoolingCooling
EK Supremacy EVO nickel-plexi Monsoon Free Center compression fittings (gold) PrimoChill PrimoFlex Advanced LRT crystal clear Alphacool 140mm 
CoolingCoolingCoolingCooling
Aquaero 6 Pro EK-FC Titan X - Nickel (x2) Alphacool Nexxxos XT45 280 mm Black Ice GTS 280 x 60 
CoolingCoolingCoolingCooling
aquacomputer d5 pump mechanics with usb and aqu... Bitspower Dual D5 Mod Top - POM Version Bitspower D5 / MCP655 Pump Mod Top S Model - Ac... Bitspower Water Tank Z-Multi 150 Inline Reservo... 
OSKeyboardPowerCase
Windows 10 Pro x64 Razer Ultimate Corsair AX 1200i Corsair 760T 
CPUMotherboardGraphicsRAM
i7 5930k Asus X99 Deluxe EVGA Titan X SC Corsair Vengeance 
Hard DriveHard DriveHard DriveCooling
WD Black Kingston HyperX Intel 730 Bitspower D5 upgrade kit 
CoolingCoolingCoolingCooling
EK Supremacy EVO Nickel Plexi EK Titan X Original CSQ Monsoon free center compression fittings 1/2-3/4 Masterkleer Clear UV 1/2-3/4 
CoolingCoolingCoolingCooling
Mayhems X1 UV clear coolant Aquacomputer Aquaero 6 Pro Aquacomputer Flow Sensor MPS 400 USB EK Coolstream XE 240 mm 
CoolingCoolingCoolingCooling
Noctua NF-F12 Industrial PPC 2000 pwm Aquacomputer D5 PWM Bitspower D5 mod top Bitspower D5 mod kit 
CoolingOSPowerCase
Bitspower Water Tank Z Multi 100 Windows 10 Pro Corsair HX1000i NZXT Phantom 630 
CPUMotherboardGraphicsRAM
core i5 6500 Asus Maximus VIII Gene  EVGA GeForce GTX 980 Ti 6GB SC+ GAMING ACX 2.0+  Corsair Vengeance LPX 16GB (4 x 4GB) DDR4 DRAM... 
Hard DriveOptical DriveCoolingCooling
Samsung 950 PRO -Series 256GB PCIe NVMe - M.2 I... Pioneer Electronics Internal Blu-Ray Writer (BD... EK Coolstream SE 240  EK Coolstream SE120 
CoolingCoolingCoolingCooling
Swiftech MCP655 PWM EK-XRES 100 Revo D5 Pump Top/Reservoir - Acetal EK-FB ASUS M8G Monoblock - Nickel EK-FC Titan X/GTX980 Ti Waterblock - Nickel 
CoolingCoolingCoolingOS
Monsoon Free Center Hardline Compression Fittin... Monsoon PETG Hardline Tube 1/2 x 5/8  EK-Vardar F4-120 (2200rpm) High Performance Liq... Windows 10 Home 
PowerCase
Seasonic 1050 Watt Gold Steiger Dynamics LEET Chassis 
  hide details  
Reply
Eldorado
(24 items)
 
Quantum
(24 items)
 
Overkill HTPC
(18 items)
 
CPUMotherboardGraphicsGraphics
i7 4790k Asus Z97-Deluxe EVGA GeForce GTX980 Ti SC ACX2.0 EVGA GeForce GTX980 Ti SC ACX2.0 
RAMHard DriveHard DriveOptical Drive
Corsair Dominator Platinum 2133 MHz Intel 730 Samsung 850 Pro Asus DRW-24B1ST 
CoolingCoolingCoolingCooling
EK Supremacy EVO nickel-plexi Monsoon Free Center compression fittings (gold) PrimoChill PrimoFlex Advanced LRT crystal clear Alphacool 140mm 
CoolingCoolingCoolingCooling
Aquaero 6 Pro EK-FC Titan X - Nickel (x2) Alphacool Nexxxos XT45 280 mm Black Ice GTS 280 x 60 
CoolingCoolingCoolingCooling
aquacomputer d5 pump mechanics with usb and aqu... Bitspower Dual D5 Mod Top - POM Version Bitspower D5 / MCP655 Pump Mod Top S Model - Ac... Bitspower Water Tank Z-Multi 150 Inline Reservo... 
OSKeyboardPowerCase
Windows 10 Pro x64 Razer Ultimate Corsair AX 1200i Corsair 760T 
CPUMotherboardGraphicsRAM
i7 5930k Asus X99 Deluxe EVGA Titan X SC Corsair Vengeance 
Hard DriveHard DriveHard DriveCooling
WD Black Kingston HyperX Intel 730 Bitspower D5 upgrade kit 
CoolingCoolingCoolingCooling
EK Supremacy EVO Nickel Plexi EK Titan X Original CSQ Monsoon free center compression fittings 1/2-3/4 Masterkleer Clear UV 1/2-3/4 
CoolingCoolingCoolingCooling
Mayhems X1 UV clear coolant Aquacomputer Aquaero 6 Pro Aquacomputer Flow Sensor MPS 400 USB EK Coolstream XE 240 mm 
CoolingCoolingCoolingCooling
Noctua NF-F12 Industrial PPC 2000 pwm Aquacomputer D5 PWM Bitspower D5 mod top Bitspower D5 mod kit 
CoolingOSPowerCase
Bitspower Water Tank Z Multi 100 Windows 10 Pro Corsair HX1000i NZXT Phantom 630 
CPUMotherboardGraphicsRAM
core i5 6500 Asus Maximus VIII Gene  EVGA GeForce GTX 980 Ti 6GB SC+ GAMING ACX 2.0+  Corsair Vengeance LPX 16GB (4 x 4GB) DDR4 DRAM... 
Hard DriveOptical DriveCoolingCooling
Samsung 950 PRO -Series 256GB PCIe NVMe - M.2 I... Pioneer Electronics Internal Blu-Ray Writer (BD... EK Coolstream SE 240  EK Coolstream SE120 
CoolingCoolingCoolingCooling
Swiftech MCP655 PWM EK-XRES 100 Revo D5 Pump Top/Reservoir - Acetal EK-FB ASUS M8G Monoblock - Nickel EK-FC Titan X/GTX980 Ti Waterblock - Nickel 
CoolingCoolingCoolingOS
Monsoon Free Center Hardline Compression Fittin... Monsoon PETG Hardline Tube 1/2 x 5/8  EK-Vardar F4-120 (2200rpm) High Performance Liq... Windows 10 Home 
PowerCase
Seasonic 1050 Watt Gold Steiger Dynamics LEET Chassis 
  hide details  
Reply
post #8638 of 11169
Quote:
Originally Posted by jvillaveces View Post

I just finished upgrading my daily driver from soft to hard tubing. I also changed the fans to Corsair ML PROs, Now I can't get the AQ6 or the Farbwerk to work. The fans are spinning at full speed, so I can tell the AQ6 is getting and passing power, but the display is off and Aquasuite says it's disconnected from USB. It says the same about the farby, although the leds are on (including an additional strip I put in, which is stuck on green until I can regain control).

Before the rebuild, I had everything connected through both USB and Aquabus. I took out all the aquabus extensions and Y's and replaced them with a Splitty9. I can't tell if that part worked or not, because of the AQ6's refusal to start. All my AC devices (AQ6 Pro, Farbwerk USB, High Flow USB, 2x aquabus pumps) are connected to an NZXT USB hub. It's the same hub I've had for over a year, linked to the same devices with the same cables. However, only the pumps and flow sensor seem to be recognized, the Aq6 and farbwerk aren't. This is what I have done so far to troubleshoot the problem:
- Connect one of the known working pumps to every port on the USB hub to see if they all work. They do
- Connect the AQ6 (and later the farbwerk) to every single port on the hub to see if they might work on some. They don't
- Remove the USB cables from both devices and test each wire/pin for continuity, Both pass
- Try to connect the stubborn devices using different cables. The farbwerk worked for a while (one boot-test-off cycle), the AQ6 didn't
- Temporarily connect everything to a NIB nzxt hub I had lying around. Same problem

Before the rebuild, I had everything connected through both USB and Aquabus. I took out all the aquabus extensions and Y's and replaced them with a Splitty9. I can't tell if that part worked or not, because of the AQ6's refusal to start. The crazy thing is that the display doesn't come on.

I'm stumped! Any ideas?


Damn that sucks man. I think i read somewhere that you can do a hard reset on the A6 from somewhere on the back?? I'm not sure though I'll look at mine and see have you tried connecting the A6 straight to the usb pins on the motherboard?
Edited by geox19 - 10/6/16 at 3:55pm
post #8639 of 11169
Where do you set delay (fan spin up delay) on the fans in the aq6? It's a bit annoying when the cpu suddenly spikes in temp for a second or two and the fans revs...
Edited by Bogga - 10/6/16 at 4:12pm
Gaming
(23 items)
 
My HTPC
(13 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7 6700k Gigabyte Z170X G1 Gaming ASUS 1080 Strix ASUS 1080 Strix 
RAMHard DriveHard DriveCooling
Corsair Vengeance LED Intel 520 SSD Crucial BX100 EKWB 1080 Strix Nickel + Black backplate 
CoolingCoolingCoolingCooling
EKWB 1080 Strix Nickel + Black backplate EKWB Supremacy Evo Nickel EKWB XE 480 Radiator EKWB XE 360 Radiator 
CoolingCoolingCoolingCooling
EKWB XRES 140 Revo D5 + Multitop EKWB XRES 140 Revo D5 + Multitop be quiet! Silent Wings 3 2200rpm x12 Barrow Fittings 
OSMonitorPowerCase
Windows 10 Pro X64 Acer x34 Predator EVGA G2 Supernova 850W Hex Gear R80 
MouseMouse Pad
Razer Deathadder Akasa Venom XXL 
CPUMotherboardGraphicsRAM
A8 6600k ASRock FM2A88M Extreme4+ APU A-Data 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Samsung Samsung Western Digital Red 
CoolingOSMonitorPower
Cooler Master Hyper 212 EVO Windows 7 X64 LG 47" LED Cooler Master GM450W 80+ Bronze 
Case
Corsair 550D 
  hide details  
Reply
Gaming
(23 items)
 
My HTPC
(13 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7 6700k Gigabyte Z170X G1 Gaming ASUS 1080 Strix ASUS 1080 Strix 
RAMHard DriveHard DriveCooling
Corsair Vengeance LED Intel 520 SSD Crucial BX100 EKWB 1080 Strix Nickel + Black backplate 
CoolingCoolingCoolingCooling
EKWB 1080 Strix Nickel + Black backplate EKWB Supremacy Evo Nickel EKWB XE 480 Radiator EKWB XE 360 Radiator 
CoolingCoolingCoolingCooling
EKWB XRES 140 Revo D5 + Multitop EKWB XRES 140 Revo D5 + Multitop be quiet! Silent Wings 3 2200rpm x12 Barrow Fittings 
OSMonitorPowerCase
Windows 10 Pro X64 Acer x34 Predator EVGA G2 Supernova 850W Hex Gear R80 
MouseMouse Pad
Razer Deathadder Akasa Venom XXL 
CPUMotherboardGraphicsRAM
A8 6600k ASRock FM2A88M Extreme4+ APU A-Data 
Hard DriveHard DriveHard DriveHard Drive
Samsung 830 Samsung Samsung Western Digital Red 
CoolingOSMonitorPower
Cooler Master Hyper 212 EVO Windows 7 X64 LG 47" LED Cooler Master GM450W 80+ Bronze 
Case
Corsair 550D 
  hide details  
Reply
post #8640 of 11169
Quote:
Originally Posted by Bogga View Post

Where do you set delay (fan spin up delay) on the fans in the aq6? It's a bit annoying when the cpu suddenly spikes in temp for a second or two and the fans revs...

Don't quote me but I don't see a delay so I don't think it's possible. I think you just have to play with the curves in the controller section.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Aquaero Owners Club