post #1 of 1
Thread Starter 
Hi all,

Tomorrow will be the day when i first start up my new system.

My specs:
Asus Sabertooth 990FX R2.0 MB
AMD FX-9590 CPU
Corsair TX850 PSU
XFX R7 250 Core Edition Passive GPU
Kingston KHX 1600C9D3K4/8GX 1.65V (4 x 2 GB) RAM
Samsung 840 EVO 120GB SSD
Intel 40GB SSD

Before i use a FULL CUSTOM watercooling ie watercooling the cpu, vrm, nb with a 480 rad.
And will be using MX-4 thermal paste on the H60.

I have to check if everything works properly nothing worse then assembling your water rig and then to realise something doesnt work properly which means taking apart the water rig...
So i decided to get my self a corsair H60 cpu cooler to test run and no not stress testing its pure for confirming it boots and to install both windows and linux (dual boot with two ssd's)

All i need to know is what are all the power saving options in the UEFI bios ive read c1, c6, cnq are there more? (please no undervolting options just simple options within the UEFI bios). Just to make sure the cpu uses a minimum of voltage and heat output also all my windows are open for fresh cold air and the case will be open. And i will use max fan speed. Installing OS shouldnt take to much cpu power correct?

Thank you in advance.
Edited by Cobra26 - 3/16/14 at 8:51pm