Overclock.net › Forums › AMD › AMD CPUs › Amd 1090t Black Edition OC Problem
New Posts  All Forums:Forum Nav:

Amd 1090t Black Edition OC Problem

post #1 of 2
Thread Starter 
Hi i am new on this forum also my english is not well but i have some question on overclocking 1090T BE

Mainboard : Gigabyte GA-870A-UD3 rev 2.0
CPU : Amd Phenom II x6 1090T Black Edition
Ram : 4GB Ripjaws DDR3 1600MHz CL9 1.5V (x2 8GB)
PSU : Epsilion 800W +80 Plus
CPU Fan : Therlmaltake Contac 29
Case : Thermaltake VH6000BWS armor +
Video Card : Asus R9 270x Top

I have this settings on Bios on Doing OC

Tweaker I (Multipler etc.) : http://tinypic.com/r/35k8x7r/8
Tweaker II (Voltage etc.) : http://tinypic.com/r/35itb48/8
Also is these first three settings are disable ? : http://tinypic.com/r/10fdvrq/8
(They were enabled but i disabled these)

I Try 4.2 ghz (Like these photo settings ) and i did stability test on aida64 extreme edition . After 3 min my pc was restart.
Temps are approximetly 46-48 C .

Which settings i use to get stable on 4.2 ghz my how much increasing voltage also NB voltage?

Help Me to overclock. If my mainbord is bad. maybe i'll buy new one GA-970 or Asus M5A97 Evo R2
Sorry my english smile.gif
post #2 of 2
I would guess your VRM temp limited.

While you have plenty of power phases, (8+2) they don't have a heat sink on them. The last 6 core Phenom II I had put an insane amount of stress and heat on the VRM's. Even with a heatsink and a fan blowing over it, it was still very warm.

You could try to find a board specific heat sink for the VRM's. Example, HERE

* It looks like this VRM sink will actually fit with some very small modifications *

See this link... HERE

Or you could always just get some universal sinks and go that route.
Edited by *ka24e* - 3/19/14 at 5:38am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Amd 1090t Black Edition OC Problem