Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Perfection Build
New Posts  All Forums:Forum Nav:

Perfection Build - Page 2

post #11 of 12
Thread Starter 
Finished two more tubes so now only one left however this will be the hardest one to do

Here's some pictures of the two new tubes

GPU to Top Rad



Next is the Front Rad to Reservoir

This one was quite hard to get right with the measurements and angles however still managed to get it right first time tongue.gif Always remember Measure twice, Cut once





The last bit of tube might have to be split up into two bits and have a male to male connector half way through :/ but I will try and see if its possible to do it without first
post #12 of 12
Thread Starter 
I'm back smile.gif sorry about the wait.

So The last bit of tubing proved so complicated that I wasn't able to fit it even after I got it all right with dimensions so I had to get a male to male connector and two know compression fittings to make it meet half way.

So here's a picture of the wire side and the two tubes finally fitted at the back.



With all the tubing now I can now start filling the system and looking for leaks.



There weren't any leaks biggrin.gif now the last thing to do is wire everything up and get it all looking nice.
I came across the a problem that my wire that connects the NZXT Hue to my lights was broken so I contacted NZXT for a replacement and I'm currently waiting for a reply.

Here's how it looks all nice and neat





So now I'm waiting for the Hue wire for the build to be fully complete.

When it came installing the OS I found out that both my CPU and the motherboard don't like my RAM that much so I had to install with just one stick of RAM that was brought down to 1333MHz. Once the OS was installed I had to muck around with RAM speeds and timings to get the thing stable and monitoring it using Memtest which took ages.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Perfection Build