Overclock.net › Forums › AMD › AMD Motherboards › Asus Sabertooth 990FX R2.0 + Amd FX-9370 Freeze and unstable
New Posts  All Forums:Forum Nav:

Asus Sabertooth 990FX R2.0 + Amd FX-9370 Freeze and unstable

post #1 of 11
Thread Starter 
I still haven't get the settings right to get my AMD stable and freeze free. Tried several Dram settings with no luck, still freezes after 1 minute or sometimes 15 minutes. The cooling (Be quite Dark rock pro 3) shouldnt be the problem, doesn't exceed 45 degrees. I had this problem also while installing Windows 7. I've searched a lot and did some changes but without succes.

Does anyone have a working settings in the bios for this combination? Here is a link with screenshots and Hardware info of my system.

Hardware info link: http://pastebin.com/GHpYq5Nb



Thanks
post #2 of 11
Could you let us know what some of the bios settings are?

Vcore, VDDA, Memory voltage, north bridge voltage, southbridge voltage and LLC


That would give us a good start.

Thanks,
S1L3Nt

Edit: I see you have the hardware info but are those what the bios settings are?
post #3 of 11
try running with 1 stick at a time and see what happens. also manually frequency and timing could help. if you get it stable with one stick also try update your bios. do not try updating the bios until you are sure its stable.
post #4 of 11
The weird thing that I noticed is that your idle vcore is at 0.876v?

For my rig, even with cool n quiet c1e enabled, my vcore doesn't drop when the clock speed goes down. It stays at 1.332 vcore all the time. Please check your vcore voltage in the bios.
post #5 of 11
Thread Starter 
Thanks for the quick responses, to be honest i tried alot, the most latest settings you can see here:

http://img194.imagevenue.com/galshow.php?gal=gallery_1395596884318_467lo

I had this setting from another user, it looks like it is something better, but still crashes. I tried also 1 memory, same result. I will make a complete overview from my settings, will be right back.
post #6 of 11
This sounds like a RAM timing issue to me. Double check your command rate, and post your timings. You're not setting the main 4 manually? I'd like to see RAM timings and voltage here, seems to be missing from the pictures.

Edit: viewing the wrong pictures upsidedwnsmiley.gif looking at your OP, yeah, I'm more leaning towards your CPU volts too...subscribed to see what happens smile.gif
Edited by LtStinger - 3/23/14 at 1:58pm
Phoenix
(17 items)
 
Lucent Dreams
(19 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3770k Stock Clocks Gigabyte GA-Z77X-UD5H Galaxy GeForce GTX 560 Ti (Fermi) 32GB Crucial Ballistix Sport 1600Mhz 9-9-9-24 
Hard DriveHard DriveHard DriveOptical Drive
128GB Crucial M4 1TB WD Black 1TB WD Black ASUS 24X DVD Burner 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 EVO Windows 7 Ultimate 64bit Dell UltraSharp U2312HM Still Deciding 
PowerCaseMouseMouse Pad
SeaSonic SS-660XP NZXT Source 210 Black Razer Imperator 2012 Custom Logo 
AudioOtherOther
None AFT PRO-57U All-in-one USB 3.0 5.25" Media Card... Thermaltake ST0026Z Max 5 Duo SATA HDD Rack 
  hide details  
Reply
Phoenix
(17 items)
 
Lucent Dreams
(19 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3770k Stock Clocks Gigabyte GA-Z77X-UD5H Galaxy GeForce GTX 560 Ti (Fermi) 32GB Crucial Ballistix Sport 1600Mhz 9-9-9-24 
Hard DriveHard DriveHard DriveOptical Drive
128GB Crucial M4 1TB WD Black 1TB WD Black ASUS 24X DVD Burner 
CoolingOSMonitorKeyboard
Cooler Master Hyper 212 EVO Windows 7 Ultimate 64bit Dell UltraSharp U2312HM Still Deciding 
PowerCaseMouseMouse Pad
SeaSonic SS-660XP NZXT Source 210 Black Razer Imperator 2012 Custom Logo 
AudioOtherOther
None AFT PRO-57U All-in-one USB 3.0 5.25" Media Card... Thermaltake ST0026Z Max 5 Duo SATA HDD Rack 
  hide details  
Reply
post #7 of 11
It seems like your vcore and vdda voltage are on the low side. You should manually set your voltages versus using a preoptimized setting.

We will also need the other voltages from northbridge to ram.
post #8 of 11
Thread Starter 
Ok, i did a whole new Windows 7 installation, I did a DEFAULT Bios setting, the only thing i changed (on advice) was to change to Mode from AHCI to IDE in the HD Settings. The installation went fine, Windows is now much stable then before, but still crashes, especially on installation of software. These are my recent settings, i didn't change a thing in the Bios or in the AI Suite. Would be pleased if someone could check the Ram settings, see screenshots.

Screenshots of info: http://img101.imagevenue.com/galshow.php?gal=gallery_1395615669135_505lo&format=show

Hardware info Complete list: http://pastebin.com/KtNyMdEi

Hardware info:

CPU: AMD FX-9370 (Piledriver/Vishera, OR-C0 (Orochi))
4400 MHz (22.00x200.0) @ 4414 MHz (22.00x200.7)
Motherboard: ASUS SABERTOOTH 990FX R2.0
Chipset: AMD 990FX (RD990) + SB920/SB950
Memory: 16384 MBytes @ 668 MHz, 11.0-11-11-28
- 8192 MB PC19200 DDR3 SDRAM - Kingston KHX2400C11D3/8GX
- 8192 MB PC19200 DDR3 SDRAM - Kingston KHX2400C11D3/8GX
Graphics: Sapphire Radeon R9 270X
ATI/AMD Radeon R9 270X, 4096 MB GDDR5 SDRAM
Drive: ST1000DM003-1CH162, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/s
Sound: ATI/AMD SB800/Hudson-1 - High Definition Audio Controller
Sound: ATI/AMD Verde/Heathrow/Chelsea - High Definition Audio Controller
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC

Thanks in advance
post #9 of 11
Default bios settings don't work too well with the fx 9370. Think of it as an overclocked fx 8350. I would suggest you manually set you voltages. If you can take a screen shot of the options that you are given under manual oc settings, that will help greatly.

Also, I have no idea why your hyper transport is so high.... I believe 2400 is the default.

Here is what you can do. Clock the CPU down to 3.6ghz and see if you are still having stability issues. If so, you need to up your Vcore.

As for your memory, you need to set it to 2400mhz. You are currently at 1333 from what I am seeing.
Edited by S1L3Nt - 3/23/14 at 4:50pm
post #10 of 11
Thread Starter 
I made screenshots of my bios settings, didn't change anything, just took it from AUTO to DOCP. I will try your advise on lowering the cpu, will reply with result soon.

bios_default.jpg 160k .jpg file bios_default2.jpg 160k .jpg file bios_default3.jpg 151k .jpg file bios_default4.jpg 159k .jpg file bios_default5.jpg 152k .jpg file bios_default6.jpg 162k .jpg file bios_default7.jpg 149k .jpg file bios_default8.jpg 175k .jpg file bios_default9.jpg 138k .jpg file
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › Asus Sabertooth 990FX R2.0 + Amd FX-9370 Freeze and unstable