Overclock.net › Forums › AMD › AMD CPUs › Need help to clock amd athlon 64 x2 dual core 5200+ 2.71ghz
New Posts  All Forums:Forum Nav:

Need help to clock amd athlon 64 x2 dual core 5200+ 2.71ghz

post #1 of 8
Thread Starter 
I am new to clocking... please make it simple

Ram: 2 GB + 8GB flash converted into RAM
Grafics card: Nvidia geforce gt630 2gb ddr3 clocked at 909mhz
OS: windows xp pro service pack3
Motherboard: asrock n61p-s

Tell me if you need other spec information and also how to get it smile.gif
post #2 of 8
drop RAM speed down 1 setting
add 2 notches of RAM voltage
Add 3 Notches of cpu/nb voltage
add 2-4 notches of Vcore voltage
Raise reference clock
 
Thuban Powah!
(14 items)
 
 
CPUMotherboardGraphicsRAM
Xeon X5650 Asus P6X58D-E Sapphire HD 7950 G.Skill Trident-X 2600 CL10 
Hard DriveCoolingPowerCase
Samsung 840 pro Bong cooler / RASA waterblock Rosewill Capstone Gold 750 None 
MouseMouse PadAudio
cheap! Newegg box panel ibeats with onboard. 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1075T w/2 cores locked @ 4.2+ M4a89GTD-Pro XFX Radeon HD 5870 8gb Samsung ddr3 1600 11-11-11-28@ 8-8-8-24 
Hard DriveHard DriveOptical DriveCooling
OCZ Agility2 40gb WD Blue 500GB Lite-On RASA waterblock 
OSMonitorKeyboardPower
Windows & Linux Samsung 1080p 2 ms Dell Thermaltake TR2-800 
CaseMouse
Cooler Master Elite 330 (was) cheap 
  hide details  
Reply
 
Thuban Powah!
(14 items)
 
 
CPUMotherboardGraphicsRAM
Xeon X5650 Asus P6X58D-E Sapphire HD 7950 G.Skill Trident-X 2600 CL10 
Hard DriveCoolingPowerCase
Samsung 840 pro Bong cooler / RASA waterblock Rosewill Capstone Gold 750 None 
MouseMouse PadAudio
cheap! Newegg box panel ibeats with onboard. 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1075T w/2 cores locked @ 4.2+ M4a89GTD-Pro XFX Radeon HD 5870 8gb Samsung ddr3 1600 11-11-11-28@ 8-8-8-24 
Hard DriveHard DriveOptical DriveCooling
OCZ Agility2 40gb WD Blue 500GB Lite-On RASA waterblock 
OSMonitorKeyboardPower
Windows & Linux Samsung 1080p 2 ms Dell Thermaltake TR2-800 
CaseMouse
Cooler Master Elite 330 (was) cheap 
  hide details  
Reply
post #3 of 8
Thread Starter 
i have no idea how to do any of these stuff
post #4 of 8
If your just going for 2.7Ghz, bump the reference clock to 208Mhz from the stock 200Mhz and your done.
post #5 of 8
Thread Starter 
nono now its 2.7(without clock)
post #6 of 8
Oh it's a Brisbane. Well in that case, bump the reference clock to 208 and see how 2.8Ghz does. Keep in mind, Brisbane's usually top out around 3Ghz on air. On water and with a little luck, 3.3ish is doable.
post #7 of 8
Thread Starter 
3ghz is more than fine for me, how do i find referance clock and don`t i need increse voltage and stuff?
post #8 of 8
The last Brisbane I had (Athlon x2 5000+) got to 3.3Ghz with an H60. Voltage was around 1.55ish, and heat wasn't really an issue. I think the board couldn't hang after 3.3Ghz.

As for finding the reference clock, look in your BIOS. You should see something similar to the pic below:



Some BIOS options are listed differently on certain boards / manufactures. What your looking for would be what says "243" in the picture. This is called the Base Clock, Reference Clock, CPU Frequency etc. That number multiplied by your "CPU Clock Ratio" determines your CPU Clock speed.

Example: 200 x 13.5 = 2700Mhz or 2.7Ghz

208 x 13.5 = 2808Mhz or 2.8Ghz

Keep in mind, any increase to the default "200Mhz" reference clock increases your Hyper Transport bus, NB Frequency, PCI-E frequency as well as your Ram frequency.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Need help to clock amd athlon 64 x2 dual core 5200+ 2.71ghz