Overclock.net › Forums › Cooling › Water Cooling › Asus Sabertooth 990FX R2.0 + Koolance MVR-PLT140 question
New Posts  All Forums:Forum Nav:

Asus Sabertooth 990FX R2.0 + Koolance MVR-PLT140 question

post #1 of 5
Thread Starter 
Im currently assembling my rig and i have a question regarding the Koolance MVR-PLT140 this in conjuction with the Koolance MVR-100



Koolance only stated to remove the CLEAR cover of the thermal pad which i did obviously as seen on their site and manual:

http://koolance.com/mvr-100-motherboard-vreg-water-block

but...there is another cover which is pinkish in colour i tried to peel it of but had no luck maybe because its supposed to stay on place...?

So do i need to remove the pinkish cover on the thermal pad or not?

Please reply only those who actually have used these items.


Thanks in advance.
post #2 of 5
From the pictures it looks as though the pink layer IS the thermal pad.
post #3 of 5
Thread Starter 
Quote:
Originally Posted by 15goudreau View Post

From the pictures it looks as though the pink layer IS the thermal pad.

Yeah you might be right since ive asked Koolance directly and they say not to remove the pink cover but you must remove the clear cover obviously. But then again there are people who managed to remove the pink cover and use it without seemingly problems.
post #4 of 5
I would say try it with the pink stuff on it and check you temps. If they are bad remove the pink layer, if they aren't I would just keep it that way.
post #5 of 5
Thread Starter 
Quote:
Originally Posted by 15goudreau View Post

I would say try it with the pink stuff on it and check you temps. If they are bad remove the pink layer, if they aren't I would just keep it that way.

Thanks,

Ive been researching about the Koolance white/pink thermal pad not only did koolance tells that ONLY the CLEAR cover should be removed the pink side is part of the thermal pad and cannot be removed, not only koolance the manufacturer tell this but users had the same question as i did and they all confirm the the story from koolance ie pink side is to be used not peeled away besides i tried it and couldnt peel it off suggesting its not meant to be removed.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Asus Sabertooth 990FX R2.0 + Koolance MVR-PLT140 question