Overclock.net › Forums › Intel › Intel Motherboards › Overclocking on DP45SG Skyberg?
New Posts  All Forums:Forum Nav:

Overclocking on DP45SG Skyberg?

post #1 of 2
Thread Starter 
Hi. I tried to overclock my Intel Pentium Dualcore E6300 (2,8GHz standardly) with Intel DP45SG Skyberg and Kingston DDR3 1066MHz Cl-7 Non-ECC.
But when I set bigger FSB, computer booted and falled after few minutes (2 - 3, than I lost DVI signal to my monitor -> restart computer and computer didn't boot, no beeps while starting). Than I have to Clear CMOS. Compututer did this also about only 1MHz overclock! (from 266x10,5 to 267x10,5). What can be wrong? I know that Intel motherboards aren't good for overclocking, but I heared that people are overclocking with DP45SG without troubles.
I don't know what to do, I am beginner with overclocking. I tried to change RAM speed to 800MHz, but without success. What can i do, please?

Thanks
Btw. Sorry for my bad english, I am from Czech Republic.
post #2 of 2
Thread Starter 
Nobody knows? frown.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Overclocking on DP45SG Skyberg?