Hey guys!
My name is Andrew and I plan on building myself a bracket, similar to what Dwood did before he dropped off the face of the planet
I will be mounting my Corsair H110 to my Nvidia GTX 670, but the bracket will also work with Antec coolers as well.
I was interested in seeing if anyone would be interested in helping me get some measurements.
Basically, my dilemma is the fact that I do not own a ton of graphic cards... I own a GTX 670 and a GTX 560. I could really use help figuring out the distance between the mounting holes around the gpu itself.
Here's what I got so far:
This is a rough sketch, and I plan to do a better job using some CAD software, but around the part where you would connect your water cooler, there's three circles. I found some table online, but it's pretty old and doesn't include a lot of newer models of GPUs.
So if anyone could confirm or deny the measurements and give their specific graphics card,
So far, this is what I have for compatibility (please confirm or deny this, as well as add to it, it would help so much!)
Compatible coolers:
Corsair H50, H55, H70, H75, H90, H105, and H110
Antec Kuhler H2O 620 and 920
Measurements for the holes around the cooler:
53mm x 53mm
55mm x 55mm
58mm x 58mm
51mm x 61mm
These holes ^^ should fit these graphics cards, and if they don't please let me know! (this is the table that I was talking about earlier)
With the 4 sets of holes mentioned earlier, all these cards should fit as well:
Nvidia: GTX 780 Ti, 780, 770, 760, Titan, 680, 670, 660Ti, 660, 580, 570, 560Ti, 560, 560SE
AMD: R9 290X, 290, 280X, 280, 270X, 270 HD7970, 7950, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
P.S. I really hope I'm not posting this in the wrong forum... If I am, please let me know, and I'll move it to wherever it should be! Thanks for reading!
Andrew
My name is Andrew and I plan on building myself a bracket, similar to what Dwood did before he dropped off the face of the planet
I will be mounting my Corsair H110 to my Nvidia GTX 670, but the bracket will also work with Antec coolers as well.
I was interested in seeing if anyone would be interested in helping me get some measurements.
Basically, my dilemma is the fact that I do not own a ton of graphic cards... I own a GTX 670 and a GTX 560. I could really use help figuring out the distance between the mounting holes around the gpu itself.
Here's what I got so far:
This is a rough sketch, and I plan to do a better job using some CAD software, but around the part where you would connect your water cooler, there's three circles. I found some table online, but it's pretty old and doesn't include a lot of newer models of GPUs.
So if anyone could confirm or deny the measurements and give their specific graphics card,
So far, this is what I have for compatibility (please confirm or deny this, as well as add to it, it would help so much!)
Compatible coolers:
Corsair H50, H55, H70, H75, H90, H105, and H110
Antec Kuhler H2O 620 and 920
Measurements for the holes around the cooler:
53mm x 53mm
55mm x 55mm
58mm x 58mm
51mm x 61mm
These holes ^^ should fit these graphics cards, and if they don't please let me know! (this is the table that I was talking about earlier)
With the 4 sets of holes mentioned earlier, all these cards should fit as well:
Nvidia: GTX 780 Ti, 780, 770, 760, Titan, 680, 670, 660Ti, 660, 580, 570, 560Ti, 560, 560SE
AMD: R9 290X, 290, 280X, 280, 270X, 270 HD7970, 7950, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
P.S. I really hope I'm not posting this in the wrong forum... If I am, please let me know, and I'll move it to wherever it should be! Thanks for reading!
Andrew