Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › How do i flash my bios to run 1212MV?
New Posts  All Forums:Forum Nav:

How do i flash my bios to run 1212MV?

post #1 of 2
Thread Starter 
My gtx 780 is using skyn3t's bios where boost is disabled, and i get my gpu to run at 1200mv at 1097mhz and 7000mhz memory. The issue is if i want to go to 1201 mhz i need 1212MV set in precision x. Its too bad every time planetside 2 crashes my driver the voltage gets reset back to 1200MV. So at this point i have to overvolt just to get my stock clock stable. So i went back to 1097 core and 6000 mhz memory (stock memory speed)

So how in the kepler bios tweaker do i set the voltage to run at 1212mhz when the core speed is at 1202 Mhz?
post #2 of 2
Every card is different! I tried Skyn3t's bios tweak to change voltages on my GTX 780 Gigabyte Windforce. My card didn't like even going to 1.212mv. You cant use PrecisionX to go 1212mv, it works differently, I used MSI afterburner. Though I just run it at 1.200mv. if you increase voltage by 12mv this usually translates to +12mhz on core clock.

Not worth going to 1.212 from 1.200 unless you want to go to 1.300V on water cooling.
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › How do i flash my bios to run 1212MV?