Overclock.net › Forums › Intel › Intel - General › Need advice: Restarts without BSOD on a stable system...
New Posts  All Forums:Forum Nav:

Need advice: Restarts without BSOD on a stable system...

post #1 of 27
Thread Starter 
I have been running Little Brother (check the link in my sig for full system info please) for almost a month now. I had sent the MoBo back to Asus to be looked at after having some issues, and they returned it back without much explanation as to what they had done, if anything at all.


I went from 2133 Corsair Dominator Platinum to Adata XPG 1600 (Bounced against the QVL for the board and chip) and have it running at 1600. About 2 weeks ago, I had a random restart/reboot with no BSOD... Well, yesterday, it decided to start going crazy and restarting about every 10 minutes. I currently have it completely shut down and waiting for an idea of where to start. I am new to the building thing, so I am unable to figure out what to do to check the events logs and see if I can get an error code, in the time I have before it shuts down again.

full system Spec for easy viewing:

i7-3770k @ 4.1 (100 x 41) max temp recorded 65c
Asus P8Z77-V
Adata XPG 1600 no overclock matched to QVL
Intel 256gb SSD only has Folding@Home and base Windows 7 Ultimate software.
Seasonic 1050w
2x 760 SC ACX (no previous issues and never heated above 70c)
Pioneer Optical Drive
Keyboard and Mouse

Nothing else is attached. I use the system to offset Big Brother with Folding and help out a little bit. I have not had any BSODs sense the MOBO was returned, but just the restart/reboot without notice or warning. Sadly, I am getting frustrated as I don't know what to do.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #2 of 27

First, set the CPU back to 100% stock.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 27
Thread Starter 
Quote:
Originally Posted by TwoCables View Post

First, set the CPU back to 100% stock.

back at stock. Made it 2 minutes and it restarted with no BSOD again. I just turned F@H off as well.. Going to let it sit and see if it repeats those actions.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #4 of 27
Quote:
Originally Posted by Scarlet-Tech View Post


back at stock. Made it 2 minutes and it restarted with no BSOD again. I just turned F@H off as well.. Going to let it sit and see if it repeats those actions.

 

If it continues, then manually set the voltage for stock so that the voltage in Windows is a little higher than what you get with Auto. Like, maybe 0.02-0.04V higher.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #5 of 27
Thread Starter 
Just restarted while downloading new drivers, nothing else going on in the background. Make that twice now.. This is extremely annoying as I have no idea what could be causing this after a full month of being stable.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #6 of 27

I know that you don't know what's causing it. lol :) If you knew, then we'd be able to fix it. :)

 

At this point, let's experiment. Manually set the voltage for stock so that the voltage in Windows is a little higher than what you get with Auto. Like, maybe 0.02-0.04V higher

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #7 of 27
Thread Starter 
LOL. It was showing 1.012 in the BIOS with offset mode and + auto, so I moved it to Manual upped it to 1.05... and it doesn't make it to the loading screen.... hmm... 1.1 for a try?
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #8 of 27
Thread Starter 
Oh, well that was cool.. I set everything to optimized defaults.. let it runs its course. It shut down, rebooted.. I shut it down once it made it to Windows, didn't change anything at all, except the voltage to 1.05 and when it restarted, it wouldn't load...

Go back to BIOS, it has itself overclocked to 4.3... and EVERYTHING is changed... the RAM is set to 1866, the BCLK is set to 103 and the multiplier is 41... LOL, I have no idea what this thing is doing..

Either way, manually reset everything to stock settings, and have it booted and waiting a few to see if he will shut down or continue to try.

:-( Just restarted again.. I am thinking to RMA this board and chip, unless I can pull it down to something else.


It is restarting before I can reset anything in the BIOS now.
Edited by Scarlet-Tech - 4/1/14 at 5:10am
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #9 of 27

Setting it manually to 1.05V is not going to result in 1.05 due to vDroop. Set it to maybe 1.1 or 1.15V.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #10 of 27
Thread Starter 
Trying those settings now.

Everything seems to be stable. Any idea why the auto voltage would stop working at stock clocks?
Edited by Scarlet-Tech - 4/1/14 at 5:59am
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Need advice: Restarts without BSOD on a stable system...