Overclock.net › Forums › Intel › Intel CPUs › 4770K Overclocking help. First Intel Chip! :)
New Posts  All Forums:Forum Nav:

4770K Overclocking help. First Intel Chip! :)

post #1 of 24
Thread Starter 
Hi guys. I made the move to Intel finally and it is a bit different to overclock it but I think I have it down and understand it. It has been like 4 years since I've had to tackle overclocking so I had to brush up. I read all the guides and I'm at 4.5ghz at 1.34 volts not stable which is why I need your help. I feel like I'm doing something wrong or my chip sucks cause 1.34v for 4.5ghz seems like crap when I see others at 1.25v-1.3v for that. When I stress with Realbench temps go to 62 -/+ 5 degrees

Motherboard is Maximus VI Formula with G.skill trident 2400 ram. I have it set to 1600 for now to take ram out of the equation for instability.
Custom Water loop with dual 240 res for cooling so i know thermal isn't the issue and I'm delidded as well!


My Volt config take right from the bios. I love this program! The bios and program are one smile.gif
post #2 of 24
The AI Suite software is notoriously flaky... and it is really hard to get a good stable overclock with it. You are much better off doing it manually... in the bios.

Read this: http://www.overclock.net/t/1411077/haswell-overclocking-guide-with-statistics/0_20

Good info! thumb.gif
Workstation
(16 items)
 
   
CPUMotherboardGraphicsGraphics
INtel 4770k ASUS maximus extreme VI  EVGA GTX 780Ti SC  EVGA GTX 780Ti SC 
GraphicsRAMHard DriveHard Drive
EVGA GTX 780Ti SC Kingston HyperX Beast 32 GB Kit (4x8 GB) 2400MH... Western Digital 2tb Enterprise Samsung 840 Pro SSD 256GB 
Optical DriveCoolingCoolingCooling
Pawtec External USB 3.0 Aluminum 8X DVD-RW Writ... Primochill ghost fitings Monsoon reservoir Swifttech MCP50x/2  
CoolingCoolingCoolingCooling
Primochill rigid acrylic tubing EK supremacy CPU block - Nickel EK 780Ti waterblocks x3 - Nickel Lamptron FC9 fan Controller 
CoolingCoolingCoolingCooling
9x Primochill Acrylic Radiator Grills Alphacool ST30 280 radiator Alphacool ST30 280 radiator Alphacool 420 80mm 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell UW3014 Merc stealth steel series keyboard EVGA NEX1500 PSU 
CaseMouseMouse PadAudio
Lian Li PC-D600 Razer Death Adder Mouse Razer Scarab mousepad Logitech X-540 5.1 speakers with sub 
  hide details  
Reply
Workstation
(16 items)
 
   
CPUMotherboardGraphicsGraphics
INtel 4770k ASUS maximus extreme VI  EVGA GTX 780Ti SC  EVGA GTX 780Ti SC 
GraphicsRAMHard DriveHard Drive
EVGA GTX 780Ti SC Kingston HyperX Beast 32 GB Kit (4x8 GB) 2400MH... Western Digital 2tb Enterprise Samsung 840 Pro SSD 256GB 
Optical DriveCoolingCoolingCooling
Pawtec External USB 3.0 Aluminum 8X DVD-RW Writ... Primochill ghost fitings Monsoon reservoir Swifttech MCP50x/2  
CoolingCoolingCoolingCooling
Primochill rigid acrylic tubing EK supremacy CPU block - Nickel EK 780Ti waterblocks x3 - Nickel Lamptron FC9 fan Controller 
CoolingCoolingCoolingCooling
9x Primochill Acrylic Radiator Grills Alphacool ST30 280 radiator Alphacool ST30 280 radiator Alphacool 420 80mm 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell UW3014 Merc stealth steel series keyboard EVGA NEX1500 PSU 
CaseMouseMouse PadAudio
Lian Li PC-D600 Razer Death Adder Mouse Razer Scarab mousepad Logitech X-540 5.1 speakers with sub 
  hide details  
Reply
post #3 of 24
Thread Starter 
Quote:
Originally Posted by cgipson1 View Post

The AI Suite software is notoriously flaky... and it is really hard to get a good stable overclock with it. You are much better off doing it manually... in the bios.

Read this: http://www.overclock.net/t/1411077/haswell-overclocking-guide-with-statistics/0_20

Good info! thumb.gif

Good to know! I've been doing it Manual. I just use AI suite to check over things along with HW monitor. I used AI suite to show my volts instead of going into the bios and taking 5 pictures lol. Lazy way I know. rolleyes.gif

80% of my volts are all set to manual.

I should also mention that I can do about 4 mins worth of realbench before windows 8 does its fancy bsod telling me unreportable error with a sad face lol.
post #4 of 24
Quote:
Originally Posted by TG_bigboss View Post

Good to know! I've been doing it Manual. I just use AI suite to check over things along with HW monitor. I used AI suite to show my volts instead of going into the bios and taking 5 pictures lol. Lazy way I know. rolleyes.gif

80% of my volts are all set to manual.

Sounds like you have the right idea then! Good. There is some good info on getting stable OCs in the link I posted... (but you may have read it already!)

A lot just depends on the Luck you had with the silicone lottery.
Workstation
(16 items)
 
   
CPUMotherboardGraphicsGraphics
INtel 4770k ASUS maximus extreme VI  EVGA GTX 780Ti SC  EVGA GTX 780Ti SC 
GraphicsRAMHard DriveHard Drive
EVGA GTX 780Ti SC Kingston HyperX Beast 32 GB Kit (4x8 GB) 2400MH... Western Digital 2tb Enterprise Samsung 840 Pro SSD 256GB 
Optical DriveCoolingCoolingCooling
Pawtec External USB 3.0 Aluminum 8X DVD-RW Writ... Primochill ghost fitings Monsoon reservoir Swifttech MCP50x/2  
CoolingCoolingCoolingCooling
Primochill rigid acrylic tubing EK supremacy CPU block - Nickel EK 780Ti waterblocks x3 - Nickel Lamptron FC9 fan Controller 
CoolingCoolingCoolingCooling
9x Primochill Acrylic Radiator Grills Alphacool ST30 280 radiator Alphacool ST30 280 radiator Alphacool 420 80mm 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell UW3014 Merc stealth steel series keyboard EVGA NEX1500 PSU 
CaseMouseMouse PadAudio
Lian Li PC-D600 Razer Death Adder Mouse Razer Scarab mousepad Logitech X-540 5.1 speakers with sub 
  hide details  
Reply
Workstation
(16 items)
 
   
CPUMotherboardGraphicsGraphics
INtel 4770k ASUS maximus extreme VI  EVGA GTX 780Ti SC  EVGA GTX 780Ti SC 
GraphicsRAMHard DriveHard Drive
EVGA GTX 780Ti SC Kingston HyperX Beast 32 GB Kit (4x8 GB) 2400MH... Western Digital 2tb Enterprise Samsung 840 Pro SSD 256GB 
Optical DriveCoolingCoolingCooling
Pawtec External USB 3.0 Aluminum 8X DVD-RW Writ... Primochill ghost fitings Monsoon reservoir Swifttech MCP50x/2  
CoolingCoolingCoolingCooling
Primochill rigid acrylic tubing EK supremacy CPU block - Nickel EK 780Ti waterblocks x3 - Nickel Lamptron FC9 fan Controller 
CoolingCoolingCoolingCooling
9x Primochill Acrylic Radiator Grills Alphacool ST30 280 radiator Alphacool ST30 280 radiator Alphacool 420 80mm 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell UW3014 Merc stealth steel series keyboard EVGA NEX1500 PSU 
CaseMouseMouse PadAudio
Lian Li PC-D600 Razer Death Adder Mouse Razer Scarab mousepad Logitech X-540 5.1 speakers with sub 
  hide details  
Reply
post #5 of 24
Thread Starter 
Quote:
Originally Posted by cgipson1 View Post

Sounds like you have the right idea then! Good. There is some good info on getting stable OCs in the link I posted... (but you may have read it already!)

A lot just depends on the Luck you had with the silicone lottery.

You think it would be ok to just keep adding volts till she is stable or bite the bullet and accept 4.4 or below as my highest I can go. Im thinking 1.35 or 1.36 might make it work.

Man I was wishing to at least get to 4.6/7 with this chip! I even prayed to the silicone gods lol!
post #6 of 24

I'm here to spam any Haswell thread to chart finished overclocking results.

Hi.

 

 

Oh, right. 

You could try bumping input voltage to 2.0v but the effect will be minimal. Your settings look fine. (Which is unfortunate.) I think it's all down to your luck with the CPU. But what stress test are you using? And how stable is not stable? There's a difference between instant Bsod on load vs Bsod after an hour or two.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #7 of 24
Thread Starter 
Quote:
Originally Posted by Darkwizzie View Post

I'm here to spam any Haswell thread to chart finished overclocking results.
Hi.


Oh, right. 
You could try bumping input voltage to 2.0v but the effect will be minimal. Your settings look fine. (Which is unfortunate.) I think it's all down to your luck with the CPU. But what stress test are you using? And how stable is not stable? There's a difference between instant Bsod on load vs Bsod after an hour or two.

Yea I've read to just set it to 2.0V just to take that out of the factor. I'm using realbench right now which is H.256 video encoding. I've been told is better to use for real world stable without pushing it really hard and hitting high temps to quick. I'm not looking for prime 95 24 hour stuff till I know the cpu can at least to 15mins of encoding. It can boot and run about 3-4mins of Realbench before it crashes.

btw nice to see you charting results! Those results have helped me at least see what to expect from haswell and get a base line.
Edited by TG_bigboss - 4/1/14 at 9:38pm
post #8 of 24
Thread Starter 
I'm at 1.376V now and still not stable -_- So I'm guessing I am missing something. Maybe ram or cache? I ran Realbench for 15mins and it passed and right after crashed. I checked the logs and came up with 0x124_GenuineIntel meaning more Vcore I guess right? I should add that Intel burn test passed on standard but anything other than that and it crashes.
Edited by TG_bigboss - 4/2/14 at 8:37am
post #9 of 24
Quote:
Originally Posted by TG_bigboss View Post

I feel like I'm doing something wrong or my chip sucks cause 1.34v for 4.5ghz seems like crap when I see others at 1.25v-1.3v for that.

Unless the person you saw posted a screenshot of prime that showed that his system was prime stable for over 12 hours overclocked at the above mentioned voltage (1.25v-1.3v), I'd say don't believe them.

People lie and people brag. Take everything mentioned here with two grains of salt and apply a 75% reduction before you buy their claims.

The most common BS story you read here is pseudo-stability reports. It works like this:

-User "Full of hot air" posts pictures of a system that was able to boot to Windows at a record low VCore and a substantial overclock but does not post pictures of several hours of Prime stress or posts pictures of a five-minute Prime session.

-Random user who doesn't know much reads the thread and goes "WOW OMG MY CHIP SUCKS" or "OMG THIS GUY IS SO PRO".

-Random user tries to replicate the disingenuous user's results and -predictably- fails.

-Random user thinks that his chip sucks.

Your chip doesn't suck. Some ppl post BS stories here. Even worse, the same ppl often claim that there is no such thing as degradation making further BS claims such as "I have been running my chip for five years overclocked at 4.8 GHz, 1.60V VCore, no degradation".

Don't believe them, they are full of it.

EDIT: Jesus, your RAM is set to run at 3200 MHz dude. Lower your RAM overclock!
Edited by Arxontas - 4/2/14 at 9:59am
QX 9650: Retired
(17 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core 2 Extreme QX9650 Asus P5Q DELUXE Gigabyte NVIDIA GeForce GTX 580 Super Overclock GSKILL Trident Extreme Performance Memory F2-88... 
RAMRAMRAMHard Drive
GSKILL Trident Extreme Performance Memory F2-88... GSKILL Trident Extreme Performance Memory F2-88... GSKILL Trident Extreme Performance Memory F2-88... Western Digital Caviar Blue 
Hard DriveCoolingOSMonitor
Western Digital Caviar Blue Thermaltake Frio Overclock King Windows 7 Professional  Philips FTV 32PFL5605H, 32'' 
KeyboardPowerCaseMouse
Microsoft Comfort Curve Silverstone Strider Gold, 850W Cooler Master Cosmos RC 1000 Microsoft Intelli Mouse 
Audio
SoundBlaster Audigy 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-4770K Processor Asus Maximus VI Hero Palit GameRock NVIDIA GeForce GTX 1080 8GB GDDR... G.SKILL ARES F3-2400C11Q-32GAB 
Hard DriveHard DriveHard DriveHard Drive
WD Blue 6TB Desktop Hard Disk Drive WD Blue 6TB Desktop Hard Disk Drive Samsung 840 Evo 500 GB Samsung 750 Evo 120 GB 
Optical DriveCoolingOSMonitor
LG GDR-H30N DVD-ROM DRIVE Thermaltake Frio Overclock King Windows 7 Professional  Acer Predator X34 
KeyboardPowerCaseMouse
Microsoft Comfort Curve Silverstone Strider Gold, 850W Corsair 780T Sharkoon M20 Gaming Mouse 
CPUMotherboardGraphicsRAM
Pentium 4 Northwood@3.06 GHz with HT Single Cor... Intel 845 PE Brookdale based Toshiba BTR80 on T... Nvidia GeForce4 460 Go DDR1 1GB 
RAMHard DriveOS
DDR1 1GB Western Digital Scorpio Blue WD2500BEVE 250GB Windows XP 32bit Home Edition 
  hide details  
Reply
QX 9650: Retired
(17 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core 2 Extreme QX9650 Asus P5Q DELUXE Gigabyte NVIDIA GeForce GTX 580 Super Overclock GSKILL Trident Extreme Performance Memory F2-88... 
RAMRAMRAMHard Drive
GSKILL Trident Extreme Performance Memory F2-88... GSKILL Trident Extreme Performance Memory F2-88... GSKILL Trident Extreme Performance Memory F2-88... Western Digital Caviar Blue 
Hard DriveCoolingOSMonitor
Western Digital Caviar Blue Thermaltake Frio Overclock King Windows 7 Professional  Philips FTV 32PFL5605H, 32'' 
KeyboardPowerCaseMouse
Microsoft Comfort Curve Silverstone Strider Gold, 850W Cooler Master Cosmos RC 1000 Microsoft Intelli Mouse 
Audio
SoundBlaster Audigy 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-4770K Processor Asus Maximus VI Hero Palit GameRock NVIDIA GeForce GTX 1080 8GB GDDR... G.SKILL ARES F3-2400C11Q-32GAB 
Hard DriveHard DriveHard DriveHard Drive
WD Blue 6TB Desktop Hard Disk Drive WD Blue 6TB Desktop Hard Disk Drive Samsung 840 Evo 500 GB Samsung 750 Evo 120 GB 
Optical DriveCoolingOSMonitor
LG GDR-H30N DVD-ROM DRIVE Thermaltake Frio Overclock King Windows 7 Professional  Acer Predator X34 
KeyboardPowerCaseMouse
Microsoft Comfort Curve Silverstone Strider Gold, 850W Corsair 780T Sharkoon M20 Gaming Mouse 
CPUMotherboardGraphicsRAM
Pentium 4 Northwood@3.06 GHz with HT Single Cor... Intel 845 PE Brookdale based Toshiba BTR80 on T... Nvidia GeForce4 460 Go DDR1 1GB 
RAMHard DriveOS
DDR1 1GB Western Digital Scorpio Blue WD2500BEVE 250GB Windows XP 32bit Home Edition 
  hide details  
Reply
post #10 of 24
Quote:
Originally Posted by Arxontas View Post


Don't believe them, they are full of it.

EDIT: Jesus, your RAM is set to run at 3200 MHz dude. Lower your RAM overclock!

Agree 100% with everything you said above... but where are you seeing the OP OCing his RAM to 3200? I see 1600 in the AI Suite screenshot....

just curious!
Workstation
(16 items)
 
   
CPUMotherboardGraphicsGraphics
INtel 4770k ASUS maximus extreme VI  EVGA GTX 780Ti SC  EVGA GTX 780Ti SC 
GraphicsRAMHard DriveHard Drive
EVGA GTX 780Ti SC Kingston HyperX Beast 32 GB Kit (4x8 GB) 2400MH... Western Digital 2tb Enterprise Samsung 840 Pro SSD 256GB 
Optical DriveCoolingCoolingCooling
Pawtec External USB 3.0 Aluminum 8X DVD-RW Writ... Primochill ghost fitings Monsoon reservoir Swifttech MCP50x/2  
CoolingCoolingCoolingCooling
Primochill rigid acrylic tubing EK supremacy CPU block - Nickel EK 780Ti waterblocks x3 - Nickel Lamptron FC9 fan Controller 
CoolingCoolingCoolingCooling
9x Primochill Acrylic Radiator Grills Alphacool ST30 280 radiator Alphacool ST30 280 radiator Alphacool 420 80mm 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell UW3014 Merc stealth steel series keyboard EVGA NEX1500 PSU 
CaseMouseMouse PadAudio
Lian Li PC-D600 Razer Death Adder Mouse Razer Scarab mousepad Logitech X-540 5.1 speakers with sub 
  hide details  
Reply
Workstation
(16 items)
 
   
CPUMotherboardGraphicsGraphics
INtel 4770k ASUS maximus extreme VI  EVGA GTX 780Ti SC  EVGA GTX 780Ti SC 
GraphicsRAMHard DriveHard Drive
EVGA GTX 780Ti SC Kingston HyperX Beast 32 GB Kit (4x8 GB) 2400MH... Western Digital 2tb Enterprise Samsung 840 Pro SSD 256GB 
Optical DriveCoolingCoolingCooling
Pawtec External USB 3.0 Aluminum 8X DVD-RW Writ... Primochill ghost fitings Monsoon reservoir Swifttech MCP50x/2  
CoolingCoolingCoolingCooling
Primochill rigid acrylic tubing EK supremacy CPU block - Nickel EK 780Ti waterblocks x3 - Nickel Lamptron FC9 fan Controller 
CoolingCoolingCoolingCooling
9x Primochill Acrylic Radiator Grills Alphacool ST30 280 radiator Alphacool ST30 280 radiator Alphacool 420 80mm 
OSMonitorKeyboardPower
Windows 7 Ultimate Dell UW3014 Merc stealth steel series keyboard EVGA NEX1500 PSU 
CaseMouseMouse PadAudio
Lian Li PC-D600 Razer Death Adder Mouse Razer Scarab mousepad Logitech X-540 5.1 speakers with sub 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 4770K Overclocking help. First Intel Chip! :)